Staff UP for a project, season, or year long.
Site Surveys - Service Calls - Augmented Labor - Full Service - See how we can help »

Audio Technica- ATND1061DAN

Beamforming Ceiling Mic With dante

Manufacturer: Audio Technica
Category: Wired Microphones
Availability: In Stock
MSRP: $2,980.00
The ATND1061 Beamforming Ceiling Array Microphone is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small. The microphone may be used singly or in multiples (for larger meeting spaces) to capture every person speaking in a room with clear, natural audio that reduces distracting environmental sounds. A state-of-the-art professional product in a familiar form factor (roughly the size of a wireless access point), the ATND1061 is easy to install, set up, and operate.
  • The ATND1061 beamforming microphone array is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small
  • Powerful onboard DSP: automix, acoustic echo cancelation, noise reduction, automatic gain control, and 4-band EQ
  • User-friendly Digital Microphone Manager software easily configures single or multiple ATND1061 microphone settings
  • Six individual output channels with up to 32 user-defined microphone pickup zones provide the flexibility to cover a wide variety of room sizes and meeting types
  • Output Channel 1 can be configured with up to 16 user-defined Coverage Zones to ensure coverage of nonpriority or unplanned participants
  • Output Channels 2-6 can be configured with up to 16 user-defined Priority Zones to ensure priority pickup of participants in known locations
  • Proprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling
  • Exclusion zones can be set in the software to avoid known sources of unwanted noise (such as air-handling systems)
  • Two network ports with Single Cable and Split modes to send Dante audio and microphone control data together or separately over category cable (ATND1061DAN)
  • Mounts flush or on the surface of a drop ceiling or hard ceiling, or in open architecture spaces using VESA mount
General Information
ManufacturerAudio-Technica U.S., Inc
Manufacturer Part NumberATND1061DAN
Manufacturer Website Address
Brand NameAudio-Technica
Product SeriesATND
Product ModelATND1061DAN
Product NameBeamforming Ceiling Array Microphone ATND1061
Product TypeMicrophone
Technical Information
Connectivity TechnologyWired/Wireless
Minimum Frequency Response60 Hz
Maximum Frequency Response18 kHz
Microphone TechnologyDynamic
Microphone TypeCeiling Mount
Surface Mount
Flush Mount
Host InterfaceRJ-45
Physical Characteristics
Product ColorWhite
Package Contents
  • Beamforming Ceiling Array Microphone ATND1061
  • IR Remote Controller
  • Surface Mount Adapter
  • 4 x Screw (M4 × 50 mm)
  • Flush Mount Adapter
  • Flush Mount Cover
  • 12 x Screw (M4 × 10 mm)
  • Hole Cover
  • 4 x Nut
  • 2 x Snap bushing
  • 2 x Tile Bridge A
  • 2 x Tile Bridge B
  • 4 x Tile Bridge C
  • Seismic Cable
  • Zip Tie
  • Safety Belt
  • 3 x Euroblock Connector
  • Installation Template
Application/UsageConference Room
Meeting Room
TAA CompliantNo
Limited Warranty5 Year