The All-in-One Presentation System with 8x4 4K60 4:2:0 HDMI/HDBaseT 2.0 Matrix Switching Controller from Kramer allows you to switch between six HDMI and two HDBaseT inputs, to two HDMI and two HDBaseT outputs at up to 10.2 Gb/s. The unit switches the video, embeds the audio, and outputs the signal with a USB extension and PoE on the HDBaseT output ports. The switcher supports balanced stereo audio, unbalanced stereo audio, and de-embedded audio sources that output to embedded audio, balanced stereo audio as well as a power amplified audio output.
The switcher features a master room controller that operates over Ethernet with control ports including a bidirectional RS-485, RS-232, IR, GPI/O, and relays to control a wide variety of AV devices. It supports a K-NET connector interface that enables access to the master controller from auxiliary room controllers such as control keypads. The unit can also provide power to auxiliary room controllers via the K-NET connectors. An Ethernet gateway is featured to control and manage remote input and output ports.
- Audio volume control
- HDMI, HDCP, and DVI compliant
- USB 1.1 and USB 2.0 (up to 127 Mb/s) channeled through HDBaseT
- Deep Color, 3D, 7.1 PCM
- Kramer re-clocking and equalization technology rebuilds the digital signal to travel longer distances
- Advanced EDID management per input
- Active source and acceptor detection
- Four balanced stereo audio inputs can also be configured as eight balanced mic inputs
- Eight relays for control are featured
- Four general purpose inputs/outputs (GPI/O) are featured
- Simultaneous IP control communication with up to 15 IP control clients
- Auto-switching and auto-scanning of inputs
- Audio breakaway and AFV (audio-follow-video) operation support
- Global mute for video and audio outputs allowing easy integration of the audio system with a public announcement audio system in case of an emergency event
- Ethernet-based firmware upgrade via a user-friendly software upgrade tool
- Kramer protocol 3000 support
- Non-volatile memory for retaining the last settings, after switching the power off and then on again