Eaton Corp- SMART1200XLHG

1000VA UPS System

Manufacturer: Eaton Corp
Category: UPS
SKU: SMART1200XLHG
Availability: Call
MSRP: $1,547.52
PRODUCT HIGHLIGHTS
Tripp Lite's SMART1200XLHG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides up to 28 minutes of runtime for a half load, or 10 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout.Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to normal 120V nominal output, without drawing battery power. The SMART1200XLHG's built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. This UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA 5-15P-HG plug with a 6 ft. cord for flexibility in placement. All four outlets provide both backup protection and surge protection, rated to 480 joules. The SMART1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite's included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.
  • Corrects under- and overvoltages from 81V to 143V
  • Corrects under- and overvoltages from 81V to 143V
  • 4 NEMA 5-15R-HG outlets
  • 4 NEMA 5-15R-HG outlets
  • Front-panel LEDs indicate load, power, voltage and battery statuses
  • Front-panel LEDs indicate load, power, voltage and battery statuses
  • Expandable runtime with optional external battery packs
  • Expandable runtime with optional external battery packs
  • 28 min. runtime at half load; 10 min. at full load
  • 28 min. runtime at half load; 10 min. at full load
  • Backup/Run Time (Half Load): 28 Minute
  • Battery Life: 6 Year
  • Hot Swappable: Yes
  • Typical Battery Recharge Time: 4 Hour
  • Height: 12.8"
  • Width: 7.5"
  • Depth: 9"
  • Form Factor: Tower
  • Weight (Approximate): 44.60 lb
SPECIFICATIONS
General Information
ManufacturerTripp Lite
Manufacturer Part NumberSMART1200XLHG
Manufacturer Website Addresswww.tripplite.com
Brand NameTripp Lite
Product LineSmartPro
Product NameSmartPro 1200XLHG UPS
Product TypeLine-interactive UPS
Technical Information
Plug/Connector TypeNEMA 5-15P
Receptacles4 x NEMA 5-15R
Switching Time4 ms
Power Description
Load Capacity1 kVA/750 W
Input Voltage110 V AC
Input Voltage Range120 V AC Single-phase
Output Voltage120 V AC Single-phase
FilteringEMI / RFI
Management
Network ManagementSNMP Manageable Optional
Overload ProtectionResettable circuit breaker
AlarmOn Battery
Overload
Low Battery
Controls/Indicators
Status IndicatorsIncludes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning
Interfaces/Ports
Interfaces/Ports1 x USB
1 x DB-9
Battery Information
BatteriesSealed Lead Acid Hot-swappable
Backup/Run Time0.27 Hour 1 kW Full Load
0.57 Hour 500 W Half Load
Battery Life26297.44 Hour to 52594.88 Hour
Battery Recharge Time4 Hour
Environmental Conditions
Temperature32°F (0°C) to 104°F (40°C) Operating
Humidity0 to 95% Non-condensing Relative Humidity
Physical Characteristics
Form FactorWall-mountable Tower
Power Cord/Cable72"
Dimensions12.75" Height x 7.50" Width x 9" Depth
Weight (Approximate)44.60 lb
Miscellaneous
Package Contents
  • SmartPro 1200XLHG UPS
  • SMART 1200XLHG Medical Grade Tower UPS System
  • PowerAlert Software and cabling
  • Warranty information
  • Instruction manual
  • Additional Information
  • Ideal UPS protection for applications in medical patient-care areas where UL 2601-1 listed medical electrical equipment is required
  • Maintains less than 300 microamps leakage current for UPS and all connected equipment
  • Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
  • Provides connected equipment with continuous power during short and long duration loss of commercial power
  • Expandable runtime is available with the addition of one or more external battery packs (part# BP36V27)
  • Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power
  • Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
  • Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
  • Resistant to electrostatic discharge
  • Supports loads up to 1000VA / 750 watts
  • 34 minutes half load runtime (500VA/375 watts), 16 minutes full load runtime (1000VA/750 watts)
  • 4 protected hospital-grade outlets; 6-ft. cord
  • 1-RS-232 and 1-USB serial port for network interface; SNMP compatible
  • SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory
  • Complete surge protection, line isolation and EMI/RFI noise filtering
  • 2 year product warranty
  • PowerAlert unattended shutdown software and complete cabling included
  • 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
  • Battery replacement door
  • Back panel grounding lug
  • System RequirementsTYPICAL APPLICATIONS: UL 2601-1 listed UPS provides ultimate safety and reliability for patient point of care solutions, telemedicine, nurse's stations, wireless communications systems, electronic prescribing applications, medical imaging and mission critical equipment. Not recommended for life support applications
    Certifications & StandardsUL1778 (USA, Series AGSM1200PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications