AtlasIED Products distributed by Almo ProAV

Atlas - PAIR 6" Coaxial 2-Way Speaker Sys w/Transformer.

Model: FAP62TMSRP: $325.98

Model FAP62T coaxial ceiling speaker package will satisfy the needs of owners, architects, contractors, and consultants by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system. These High performance syst...ems are perfectly suited for many business music and public address applications. Compact profile enclosures and wide dispersion make the FAP62T a perfect choice for low ceilings.The loudspeaker's components match the performance of the legendary Atlas Sound Strategy Series II FA Series. High quality construction of the 1" voice coil drivers include polypropylene cones with a butyl rubber surround. The19mm coaxially mounted tweeter is constructed of durable PEI. The high sensitivity of the loudspeaker means less power may be required to achieve the desired SPL. The loudspeakers are factory assembled to an optimally tuned & ported deep drawn enclosure and include a specially designed low saturation 70.7V/100V transformer. A convenient front mounted switch allows tap selection without the need to remove the speaker from the ceiling. Uniquely designed "easy access" input panel design allows for "thru" conduit runs using flexible or rigid conduit.A detachable Phoenix style, locking four-pole connector provides for easy daisy chain wiring to other full range loudspeakers or Atlas Sound FAPSUB subwoofers. Attractive press-fit grille blends seamlessly into contemporary architecture.Mounting is simplified with Strategy Series II style "dog leg" tabs that allow easy installation intodrop tile or drywall ceilings with provided tile bridge assembly. The tile bridge consists of (2) triangularformed mounting rails and a c-ring assembly. The c-ring can be attached to the rails with the screws provided to extend support to the t-bar grid in suspended ceiling applications. Multiple hole locations are provided to allow the c-ring to be positioned all the way to the outer edge the tile if necessary. For existing dry-wall applications the tile bridge c-ring and support rails can be inserted into the hole cut for the enclosure. For easy positioning the "V" shaped support rails match the shape of the C-ring tabs for easy maneuvering and location when working "blindly" above the deck. For new construction drywall ceiling applications the optional model FAP62-TR trim ring is available. This unit provides a marked location for drywall installers to cut around essentially reserving the desired location in the ceiling until final installation of loudspeaker. Mounting holes are provided to accommodate 16" or 24" OC stud/joist mounting.

Product Features:

RMS Output Power: 50 W
Woofer Driver Size: 6"
Woofer Driver Material: Polypropylene

Quick Quote View Details

Atlas - Deluxe Decora Plate Mounted 100W Attenuator, 3dB Steps

Model: AT100DMSRP: $46.99

Decora style High-quality auto transformer series provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems. Attenuation is accomplished in ten...

Quick Quote View Details

Atlas - Deluxe Deco Plate Mounted 35W Attenuator, 3dB Steps,

Model: AT35DMSRP: $42.99

Decora style High-quality auto transformer series provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems. Attenuation is accomplished in ten...

Quick Quote View Details

Atlas - Flush Mount Speakers

Model: DT22MSRP: $117.99

Installer friendly Atlas Sound DT22 provides clear paging and background music in a labor saving package. Ideal for use in shopping malls, department stores, and anywhere large quantities of loudspeakers are to be utilized. The Atlas Sound DT22 ...

Quick Quote View Details

Atlas - Extendable Length 38.5" Boom Ebony with 2 -lb Counterweight

Model: PB21XEBMSRP: $100.99

The Atlas PB21XEB 25.25-38.50" Adjustable Boom Arm (Ebony) easily extends from 25.25-38.50" with a single motion, making suitable for a wide variety of miking applications. The PB21XEB features a fixed 2 lb counterweight for stability. The fixed...

Quick Quote View Details

Atlas - 100W Single Gang Stainless Steel 70.7V Commercial Attenuator

Model: AT100MSRP: $42.99

High-quality auto transformer series provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems. Attenuation is accomplished in ten make before ...

Quick Quote View Details

Atlas - Deluxe, Rack Mounted 100W Attenuator, 3dB Steps

Model: AT100-RMMSRP: $39.99

The Atlas Sound AT100-RM Rack Mounted 100W Attenuator is designed to provide the attenuation convenience of rack-mounted equipment in cabinets and consoles. It has a matte black polycarbonate dial scale overlay with adhesive backing replaces the...

Quick Quote View Details

Atlas - Deluxe Decora Plate Mounted 10W Attenuator, 3dB Steps

Model: AT10DMSRP: $35.99

Decora style high-quality auto transformer series provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems. Attenuation is accomplished in ten...

Quick Quote View Details

Atlas - Desktop Stackable Mic Stand 6" Ebony

Model: SMS2BMSRP: $43.99

Saves desk and storage space with its ability to stack as many as six units in a single 6" footprint. Unit features a wide mouth opening and floating pole design that, through slight rotation, can be easily stacked. The SMS2B is available in non...

Quick Quote View Details

Atlas - Male RCA to Phoenix Connector Cable (1 Meter w/ 5.5mm Phoenix Connector)

Model: AS2RCA-1M-PHXMSRP: $34.99

Get the most out of your system with cabling and connections from Atlas Technologies' newest product group, Atlas Signal. The most trusted name in commercial audio has added wiring to its industry leading speakers, amplifiers, power equipment, a...

Quick Quote View Details

Atlas - 6" Strategy I Series Loudspeaker (PAIR)

Model: FAP62T-USAMSRP: $437.98

The FAP62T-USA Strategy Series speaker package includes premium-quality, state-of-the-art 6" Strategy products, in a simple to order, simple to install package. This package includes everything necessary for installation including the FA136T87 S...

Quick Quote View Details

Atlas - 4" 2-Way Weather Resisant Speaker. (PAIR)

Model: SM42T-WHMSRP: $217.98

Use surface-mount Atlas Sound SM42T Series loudspeaker systems for commercial, professional and residential applications or where high-fidelity sound and weather-resistance is desired. Full-range frequency response makes these systems ideal for ...

Quick Quote View Details

Atlas - TSD, Mixer, 2 Mic/Line, 1 SUM RCA

Model: TSD-MIX41MSRP: $283.99

The TSD-MIX41 4x1 Mic/Line Mixer from Atlas Sound is designed for applications where multiple mic or line sources need to be sub mixed or summed. In house of worship applications the TSD-MIX41 can be used to combine similar sources such as choir...

Quick Quote View Details

Atlas - Horn Loudspeaker 25V/70.7V/100V-30W Transformer

Model: AP-30TMSRP: $194.99

The Model AP-30T is a double re-entrant loudspeakers which deliver 30-watts of continuous power handling, superior intelligibility and unparalleled efficiency. The AP-30T operates within a nominal frequency response range of 300Hz - 12kHz and o...

Quick Quote View Details

Atlas - 4" 2-way Pendent Mount Speaker

Model: PM4FA-BMSRP: $220.99

Model PM4FA-B uses the familiar response and dispersion of Atlas Sound's model FA134 high performance 4" Strategy Series® driver. This loudspeaker is the same FA series device used in Atlas Sound's popular FAP42T in-ceiling speaker package. ...

Quick Quote View Details

Atlas - 3-Input, 35-Watt Mixer Amplifier With Global Power Supplu

Model: AA35GMSRP: $365.99

The AtlasIED AA35G, a 3 input channel mixer amplifier designed for distributed business paging and background music (BGM) systems, small to medium speech privacy systems and in applications where music on hold (MOH) plus paging is required. The ...

Quick Quote View Details

Atlas - XLR Cable (15 meters)

Model: AS2XLR-15MMSRP: $34.99

Get the most out of your system with cabling and connections from Atlas Technologies' newest product group, Atlas Signal. The most trusted name in commercial audio has added wiring to its industry leading speakers, amplifiers, power equipment, ...

Quick Quote View Details

Atlas - 6-INPUT, 120-WATT MIXER AMPLIFIER

Model: AA120GMSRP: $882.99

The AA120G is a 120 Watt six input multi load impedance mixer amplifier that is engineered with many unique features to assist the contractor or installer in today's commercial business audio environment. It is designed for distributed paging an...

Quick Quote View Details

Atlas - AMP, MIXER 6CH INPUT 240W with Global Power Supply

Model: AA240GMSRP: $1241.99

The AA240G is a 240 Watt six input multi load impedance mixer amplifier that is engineered with many unique features to assist the contractor or installer in today's commercial business audio environment. It is designed for distributed paging an...

Quick Quote View Details

Atlas - 35" to 63" Adjustable All-Purpose Mic Stand

Model: MS-10CEMSRP: $66.99

The Atlas Sound MS-10CE is an all-purpose ebony finished stand featuring durable tubing, the famous Atlas Sound® wearproof clutch, and a 10" dia. die cast circular base. The three-piece clutch provides positive locking control and is able to...

Quick Quote View Details

Atlas - 38" to 62" Adjustable Professional Mic Stand w/ Air Suspension

Model: MS25EMSRP: $227.99

The Atlas Sound MS25E heavy-duty studio recording stand features an integral air suspension system to protect sensitive microphones. Height extension up to 62" is achieved by an oversized 7/8" and 1-1/8" dia. tube assembly. Triangular cast base ...

Quick Quote View Details

Atlas - Stackable Mic Stand with 10" Round Base

Model: SMS5BMSRP: $55.99

The most trusted name in microphone stands, Atlas Sound, is adding to its Atlas Support product line with new stacking mic stands. The SMS5B saves stage and storage space with its ability to stack as many as six units in a single 10" footprint. ...

Quick Quote View Details

Atlas - Passive Summing Cable for AA Series Amplifiers (5.5mm Phoenix Connector)

Model: AA-YSUMMSRP: $56.99

The summing cable can be used to combine a stereo unbalanced signal into a mono unbalanced signal. The AA-YSUM features a 3' (1 m) cable with two Male RCA connectors, summed together via internal resistor network into a single three position Pho...

Quick Quote View Details

Atlas - 15A Power Conditioner and Distribution Unit

Model: AP-C15DMSRP: $513.99

The AP-C15D is been designed to meet most installation requirements for AC power distribution and equipment power protection. The 15A compact 1RU unit AC Mains Voltage can be monitored via the front panel from the precision Digital Volt Meter. T...

Quick Quote View Details

Atlas - AP-S15HR HALF RACK PWR STRP RF FLT

Model: AP-S15HRMSRP: $146.99

The AP-S15HR has been designed to fit into Atlas half width rack equipment racks. The AP-S15HR meets or exceeds most installation requirements for AC power distribution and equipment power protection. The AP-S15HR Half Rack design offers power m...

Quick Quote View Details

Atlas - 15A Power Conditioner and Distribution Unit

Model: AP-S15LAMSRP: $202.99

The AP-S15LA features noise filtering for unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines by nearby radio transmitters or wireless products. EMI filters are also incorporated to reduce noise from Electromagn...

Quick Quote View Details

Atlas - STAND ALONE 15A PWR CND W/REM TGR

Model: ECM-15SHMSRP: $270.99

The Atlas Power ECM-15SH is a 120V 60Hz AC, 15A Single Housing (SH) Power Conditioner and AC Spike Suppressor that is designed to be used as a standalone unit or in conjunction with an Atlas Power Sequence controller, ECS-6RM or the ECS-3, up to...

Quick Quote View Details

Atlas - SPEAKERS

Model: ECM-20MSRP: $164.99

ECM-20 20A AC Power Conditioner and Spike SuppressorThe Atlas Power ECM-20 is a 20A Power Conditioner and AC Spike Suppressor that is designed to be used as a standalone unit or in conjunction with an ECS unit up to 1000ft away. The ECM-20 featu...

Quick Quote View Details

Atlas - STAND ALONE 20A PWR CND W/REM TGR

Model: ECM-20SHMSRP: $353.99

ECM-20SH 20A AC Power Conditioner and Spike Suppressor (Single Housing)The Atlas Power ECM-20SH is a 120V 60Hz AC, 20A Single Housing (SH) Power Conditioner and AC Spike Suppressor that is designed to be used as a standalone unit or in conjuncti...

Quick Quote View Details

Atlas - 15A Power Sequencer and Conditioner

Model: ECS-3MSRP: $700.99

The ECS-3 has been designed to meet most installation requirements for AC power distribution and equipment power protection. The 15A compact 1 RU unit features three sequential timing sections that can be activated via the unit, or remotely. Fro...

Quick Quote View Details

Atlas - Single Output Kit - Includes (1) IP-ZCM W/(1) PA702-RMK

Model: IP-ZCM1RMKMSRP: $1121.99

The AtlasIED IPX Series IP-to-analog gateways are perfect for connecting your unified communication platform to off network analog third party systems, including, but not limited to, sending notifications to analog overhead paging, trigger or be... triggered by access-control systems, assist to fire alarm, and two-way audio support for video-surveillance, simply plug and playAtlasIED IP-ZCM1RMK registers as a communication endpoint directly within InformaCast, and SA-Announce Advanced Notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, & scheduled announcements, while leveraging the WAN/LAN Network Architecture.When used within a Cisco Environment, these same IP speakers from AtlasIED can join Cisco's Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco's SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).Where 3rd party notification applications are not required, the IP-ZCM1RMK IP-to-Analog Gateways can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts /public address applications. Model IP-ZCM1RMK includes a rack mount kit for properly mounting the IP-ZCM in a standard width rack.Features The IP-ZCM1RMK from AtlasIED consist of a factory assembled PCB control board housed in a rugged and compact 1RU chassis. The unit provides the same addressable end point functionality as an IP speaker or IP phone with the convenience of line level and amplified audio output. This line level output is ideal for use with AtlasIED AA, PA, or CP series amplifiers to power large zones of traditional 25V, 70.7V, or 100V AtlasIED speakers or paging horn speakers.In addition to the line level output, the IP-ZCM1RMK provides 1-channel of 15-Watt RMS at 8-ohm or, 70.7V amplified output to drive a small cluster of analog speakers. It also includes 2 GPI Inputs, 1 GPI Output and Microphone input for talk back or listen applications.The IP-ZCM1RMK features include Auto-provisioning and auto-registration. This is an easy and timesaving way to configure our IP speakers on your Voice VLAN, similar to a VoIP handset. By sitting on the same VLAN, both VoIP phones and IP speakers share the same Quality of Service (QoS) so communications are always secure and guaranteed.

Product Features:

Dynamic or Static IP Address
IEEE802.3 10/100Base-T Ethernet
IEEE 802.1q Tagging

Quick Quote View Details

Atlas - Dual PoE+ IP Addressable IP-to-Analog Gateways with Integrated Amplifier

Model: IP-ZCM2RMKMSRP: $2457.99

PoE (RJ-45) Port: Yes
Number of Network (RJ-45) Ports: 1
Ethernet Technology: Fast Ethernet

Quick Quote View Details

Atlas - 3 Amp Relay

Model: RLM-24MSRP: $65.99

The RPM/RLM Series is a modular relay pak line which offers configuration flexibility in reference to number of relays, relay type, and built-in expansion. There are consists of two basic chassis models (RPM2, and -4) and two types of plug-in re...

Quick Quote View Details

Atlas - 2 Socket Modular Relay Pack

Model: RPM-2MSRP: $180.99

Atlas Model RPM-2 provides a convenient and economical way to wire 24V relays into speaker switching circuits, zone paging applications, etc. All relay contacts are clearly silk screened on each PC board for easy circuit wiring, and are terminat...

Quick Quote View Details

Atlas - Wall Mount Shelf 12" Deep, White

Model: AS-120-592MSRP: $91.99

Sturdy shelves with wire access provide for convenient wall-mounting of amplifiers or electronic equipment. AS-120 includes keyhole mounting slots. May be mounted so equipment is installed between side supports or inverted "bookshelf-style" for ...

Quick Quote View Details

Atlas - SHF WLL 12H 20W 17D BLK

Model: AS-140-592MSRP: $114.99

Sturdy shelves with wire access provide for convenient wall-mounting of amplifiers or electronic equipment. Versatile AS-140 may be mounted so equipment is installed between side supports or inverted "bookshelf-style" for open equipment placemen...

Quick Quote View Details

Atlas - BlueBridge 7" Touch Panel Wall Controller (Black)

Model: BBWP-TOUCH7BMSRP: $1312.99

The BBWP-TOUCH7B is a 7 inch touch screen control with multi-page control flexibility. The unit is designed to work with AtlasIED BlueBridge® Designer software allowing for remote control of integrator configured DSP settings. The screen is ...

Quick Quote View Details

Atlas - Atmosphere Virtual Wall Controller QR Code Holder

Model: GEM-5MSRP: $51.99

Wall mountable Atmosphere virtual wall controller QR code holder.nbsp; These are sold in a packages of 5.

Easy access to virtual wall controller
Clean design inspired by Atmosphere accessories
Two countersunk mounting holes for screws

Quick Quote View Details

Atlas - Atmosphere Remote Bluetooth Audio Input

Model: A-BT-US

The Atmosphere A-BT is a remote Bluetooth™ audio input (mono) to an Atmosphere AZM audio processor. This expansion allows the Bluetooth™ receiver to be optimally placed for wireless coverage. The AZM will automatically detect the A-B...

Quick Quote View Details

Atlas - Atmosphere RCA/3.5mm Audio Input

Model: A-RCA-US

The Atmosphere A-RCA is a remote RCA/3.5mm audio input to an Atmosphere AZM audio processor. This expansion acts identically to the on-board RCA inputs. The AZM will automatically detect the A-RCA and dynamically assign appropriate audio setting...

Quick Quote View Details

Atlas - 12" Coaxial Compression Driver with 70.7V/100V-60W Transformer

Model: 12CXT60MSRP: $567.99

The 12CXT60 is a 250 watt loudspeaker that combines a 12" diameter, low frequency transducer and a 1" exit, true compression driver. With the addition of a factory installed, high efficiency, 60W, 70.7/100V step down line transformer. The unit f...

Quick Quote View Details

Atlas - Contemporary Wall or ceiling baffle 8 inch

Model: 161-8MSRP: $45.99

This attractive baffle is ideal for most interiors and may be used for recessed ceiling or recessed wall-mount installations. This model feature concealed loudspeaker mounting studs and standard screw-mounting to enclosures, tile bridges or moun...

Quick Quote View Details

Atlas - Deluxe Steel Baffle 12" - White

Model: 164-12AMSRP: $82.99

The 164-12A features an attractive beveled edge baffles and a square loudspeaker cutout. A separate loudspeaker mounting plate provides for an extended bass response. Large perforations in the protective screen simplify repainting when required ...

Quick Quote View Details

Atlas - SURFACE MOUNT FEMAIL MIC FLANGE 5/8IN #27 THREAD EBONY

Model: AD-11BEMSRP: $13.99

Atlas's Surface Mount Female Mic Flange 5/8 inch-27 Thread Ebony Finish with 4/3 inch base diameter offers a durable design and a long-lasting performance while accommodating all types of microphone holders.

Durable design for use in touring P.A. applications
Quality craftsmanship assures compatibility and long-lasting performance
U. S. standard 5/8"-27 termination accommodates all types of microphone holders

Quick Quote View Details

Atlas - SURFACE MOUNT FEMAIL MIC FLANGE 5/8IN #27 THREAD EBONY

Model: AD-11EMSRP: $11.99

5/8"-27 female flange with 1 3/4" base diameter; ebony (Net Weight: 1 oz.) This item is sold in packs of 100.

Durable Design for Use in Touring P.A. Applications
Quality Craftsmanship Assures Compatibility and Long-Lasting Performance
U. S. Standard 5/8"-27 Termination Accommodates All Types of Microphone Holders

Quick Quote View Details

Atlas - SURFACE MOUNT MALE MIC FLANGE 5/8IN #27 THREAD CHROME

Model: AD-12BMSRP: $15.99

The chrome Atlas AD-12B Desktop Mounting Flange is a simple and effective way to mount microphone fixtures onto desktops, podiums, conference tables, etc. The 5/8"-27 thread stud accommodates compatible goosenecks, microphone mount shafts, stand...

Quick Quote View Details

Atlas - SURFACE MOUNT MALE MIC FLANGE 5/8IN #27 THREAD EBONY

Model: AD-12BEMSRP: $13.99

The Atlas AD12BE is a surface mounting flange with a 5/8-27 threaded fitting to accomadate goosenecks or microphone poles and microphone mounting hardware.

AD-12BE Surface Mount Male Mic Flange 5/8"-27 Thread Ebony Finish
Durable Design for Use in Touring P.A. Applications
Quality Craftsmanship Assures Compatibility and Long-Lasting Performance

Quick Quote View Details

Atlas - 12" 2-Way Stadium Horn System 65° x 65° - Battle Ship Grey

Model: AH66-12T-BSGMSRP: $1638.99

AtlasIED model AH66-12T-BSG "stadium horn" is ideal for directional sound distribution where full range reproduction, maximum intelligibility and high sound pressure levels are required. Applications include football stadiums, sports arenas, bas...

Quick Quote View Details

Atlas - 8" 2-way Stadium Horn System 65° x 65°- Battle Ship Gray

Model: AH94-8T-BSGMSRP: $1084.99

AtlasIED model AH94-8T-BSG "stadium horn" is ideal for directional sound distribution where full range reproduction, maximum intelligibility and high sound pressure levels are required. Applications include football stadiums, sports arenas, base...

Quick Quote View Details

Atlas - 12" 2-Way Stadium Horn System 90° x 90° - Battle Ship Grey

Model: AH99-12T-BSGMSRP: $1638.99

InstallationA heavy-duty stainless steel "C" style mounting bracket is included with the AH99-12T-BSG to allow easy mounting to most any flat surface. Three drop forge eyebolts are also pre-installed (2-front of horn plus 1-rear for "pull-up") f...

Quick Quote View Details

Atlas - Ten 3" Full Range Speakers and Three Tweeter Line Array Speaker w 60W

Model: ALA10TMSRP: $750.99

The ALA10T-B column line array speaker delivers maximum performance in a minimum footprint and excels in applications that require excellent speech intelligibility. The ALA10T-B’s transducer configuration combines ten tight packed 3" full range ...

Quick Quote View Details

Atlas - 15 Speaker Full Range Line Array Speaker System

Model: ALA15TMSRP: $838.99

The ALA15T column line array loudspeaker delivers maximum performance in a minimum footprint and excels in applications that require excellent speech intelligibility. The ALA15T's transducer configuration combines fifteen tight packed 3" full ra...

Quick Quote View Details

Atlas - EN54-24 Certified 5 Speaker Full Range Line Array Speaker System - White

Model: ALA5TAWMSRP: $509.99

Quick Quote View Details

Atlas - HRN PG 8 M/15W MTL GRY

Model: AP-15MSRP: $123.99

The 8-ohm Model AP-15 is a double re-entrant loudspeakers which deliver 15-watts of continuous power handling, superior intelligibility and unparalleled efficiency. The AP-15 Series operates within a nominal frequency response range of 400-14,00...

Quick Quote View Details

Atlas - Horn Loudspeaker with 25V/70.7V/100V-15W Transformer

Model: AP-15TMSRP: $148.99

The 8-ohm Model AP-15T is a double re-entrant loudspeakers which deliver 15-watts of continuous power handling, superior intelligibility and unparalleled efficiency.The AP-15 Series operates within a nominal frequency response range of 400-14,00...

Quick Quote View Details

Atlas - Emergency Signaling Horn Loudspeaker w/25V/70.7V-15W Transf/Cap Line Sup

Model: AP-15TUCMSRP: $173.99

Model AP-15TUC is a double re-entrant loudspeakers which delivers 15-watts of continuous power handling, superior intelligibility and unparalleled efficiency. The AP-15 Series operates within a nominal frequency response range of 400-14,000 Hz a...

Quick Quote View Details

Atlas - HRN PG RG T72/30W PLSTC GRY

Model: APC-30TMSRP: $231.99

APC-30T is a high-power 30 watt loudspeaker with extended low frequency response. Unit is equipped with a wide-angle molded plastic bell for sound directivity. Transformer includes a screwdriver-adjust power selection with a 45 ohm tap for inter...

Quick Quote View Details

Atlas - 4" Loudspeaker with 25V/70.7V-4W Transformer and 51-4 Baffle

Model: B51-4MSRP: $65.99

The B51-4 loudspeaker assembly combines the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a factory-assembled loudspeaker, transformer and baffle. Model incorporates the popular Atl...

Quick Quote View Details

Atlas - 4" Loudspeaker with 70.7V-4W Transformer and T720-4 Baffle

Model: BT720-4-T47MSRP: $96.99

BT720-4-T47 is a 4" loudspeaker with 70.7V-4W transformer and T720-4 baffle. Attractive B Series loudspeaker assemblies combine the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a f...

Quick Quote View Details

Atlas - 8" Dual Cone Loudspeaker with 25V-5W Transformer, Priced Each/Sold Pair

Model: C10AT25MSRP: $41.99

Model C10AT25 is a dual cone, 25-watt 8" (205mm) loudspeaker with a 10 oz. (260g) ceramic magnet, and a pre-mounted 25V 5W transformer. It includes a curvilinear, treated paper cone for lower harmonic distortion. The loudspeaker is also equipped...

Quick Quote View Details

Atlas - 8" Dual Cone In-Ceiling Speaker with 4-Watt 25V/70V Transformer and 10oz

Model: C10AT72

Model C10AT72 is a dual cone, 25-watt 8" (205mm) loudspeaker with a 10 oz. (260g) ceramic magnet, and a pre-mounted 25/70.7V 4W transformer. It includes a curvilinear, treated paper cone for lower harmonic distortion. The loudspeaker is also equ...

Quick Quote View Details

Atlas - 8" Coaxial Loudspeaker with 70.7V-16W Transformer

Model: C803AT167MSRP: $127.99

Features Industry Standard 8" (203mm) Coaxial, 16 Watt Loudspeaker Offers Proven Performance with Wide Frequency Response Post-Mounted Tweeter Adds Strength and a More Attractive Appearance Ideal for Multi-Purpose Commercial, Industrial, and...

Quick Quote View Details

Atlas - SPK 8 IN COAX T7/4W

Model: C803AT47MSRP: $69.99

Model C803AT47, A high-quality 16-watt loud speaker with a factory-installed 70.7V 4W linematching transformer Model C803AT47 utilizes a postmounted tweeter which adds strength to the assembly and provides an attractive appearance. This coaxial ...

Quick Quote View Details

Atlas - 40x20 Constant Directivity Re-Entrant Paging Horn

Model: CD42MSRP: $509.99

The Industry's Only Constant Directivity Re-Entrant Horn, CD Series horns from AtlasIED provide greatly improved uniform sound coverage compared to conical designs. With all models the horizontal coverage pattern is precisely controlled over a f...

Quick Quote View Details

Atlas - 90x40 Constant Directivity Re-Entrant Paging Horn

Model: CD94MSRP: $487.99

The Industry's Only Constant Directivity Re-Entrant HornNew CD Series horns from AtlasIED provide greatly improved uniform sound coverage compared to conical designs.With all models the horizontal coverage pattern is precisely controlled over a ...

Quick Quote View Details

Atlas - MTX, 8", 2-WAY ROUND IN-CEILING, PR

Model: CT825CMSRP: $329.95

MTX Audio custom-installed speakers represent the culmination of over 30 years of acoustic research and development. Every MTX Audio speaker is designed, engineered, and manufactured from the ground up to be the best-best sound, best quality, be...

Quick Quote View Details

Atlas - 8" Speaker Package with 25V/70.7V-4W Transformer and 161-8 Baffle

Model: D161-8MSRP: $86.99

Convenient, labor saving assemblies are ideal for use wherever a general-purpose paging and music speaker is required. Quality components are factory wired and shipped complete with dual-cone speaker, dual-voltage transformer and round or square...

Quick Quote View Details

Atlas - Coaxial Loudspeaker with 70.7V-8W Transformer

Model: DD87W-HCMSRP: $102.99

Environmental Treatment Coatings Leveraging the power of nanotechnology, AtlasIED's all new patented environmental coating protects loudspeakers for long-term reliability. The first technology protects against water intrusion and the second tech...

Quick Quote View Details

Atlas - Paging Horn, Driver Not Included, Weatherproof, 95 Dispersion

Model: DR-32MSRP: $156.99

Atlas Sound DR Series double re-entrant horns are designed for use with compression driver units to offer superior music and voice communications over distance and ambient noise. The circular projectors are equipped with a resonance damping ri...

Quick Quote View Details

Atlas - Paging Horn, Driver Not Included, Weatherproof, 75 Degree Dispersion

Model: DR-54MSRP: $248.99

AtlasIED DR Series double re-entrant horns are designed for use with compression driver units to offer superior music and voice communications over distance and ambient noise. The circular projectors are equipped with a resonance damping ring fo...

Quick Quote View Details

Atlas - SEQ SW SYS CON 6 CIRCUITS RMT MNTR

Model: ECS-6RMMSRP: $782.99

The ECS-6RM modular system has been designed to meet most installation requirements for AC power distribution, equipment power conditioning and surge suppression protection. The compact 1 RU unit features six sequential timing sections that can ...

Quick Quote View Details

Atlas - 15" Passive Woofer use with EJW115A, White (Install)

Model: EJW115XI-WMSRP: $1446.99

The Atlas A-Line EJW115XI-W is a single 15" passive subwoofer in an optimally designed and constructed sealed Baltic birch enclosure. This design provides even sound distribution. The EJW115XI-W is designed to be used with an EJ2003-W full range...

Quick Quote View Details

Atlas - Line Source, x15 3" Extended Range Drivers, Passive, Black

Model: EL1503-BMSRP: $1343.99

The Atlas A-Line EL1503-B line array speaker system is a high intelligibility, high efficiency speaker system that is ideally suited for use in speech and music reproduction applications for small venues like houses of worship, small theaters, o...

Quick Quote View Details

Atlas - Speaker 6" Coax T7/4W HQ FA

Model: FA136T47MSRP: $86.99

Model FA136T47 is a high-fidelity, coaxial, 6" loudspeaker that delivers 50-watts with full frequency response and wide dispersion. UL listed assembly is manufactured with highquality materials including a Kevlar®, fiber-reinforced, polyprop...

Quick Quote View Details

Atlas - 8" Coaxial Loudspeaker 100W

Model: FA138MSRP: $75.99

Model FA138 is Atlas Sound's premium 8" coaxial loudspeaker. This 100-watt unit includes a circuit board mounted high-pass/low-pass crossover which produces outstanding sound quality. Model FA138 contains a reinforced polypropylene cone woofer,...

Quick Quote View Details

Atlas - 8" Coaxial Speaker T7 16W HQ FA

Model: FA138T167MSRP: $144.99

Model FA138T167 is Atlas Sound's premium 8" coaxial loudspeaker with a factory installed, high efficiency 16 Watt 70.7V transformer. The loudspeaker includes a circuit board mounted high-pass/low-pass crossover which produces outstanding sound q...

Quick Quote View Details

Atlas - 8" Speaker Coax T7/32W HQ FA

Model: FA138T327MSRP: $162.99

Model FA138 is Atlas Sound's premium 8" coaxial loudspeaker. This 32-watt unit includes a circuit board mounted high-pass/low-pass crossover which produces outstanding sound quality. It incorporates a tapered backplate for increased magnetic cir...

Quick Quote View Details

Atlas - 4" Coaxial Loudspeaker with 70.7V/100V-16W Transformer and 8-Omega Bypas

Model: FA42T-6MBMSRP: $73.99

Model FA42T-6MB is the entire 4" speaker/ transformer/ selector switch/ front plate assembly found in the FAP42T assembly. The footprint of the FA42T-6MB is identical to a standard FA series 6" speaker component. This footprint allows the motor ...

Quick Quote View Details

Atlas - PROAUDIOEQUIPME

Model: FAP136T87-720

Quick Quote View Details

Atlas - PAIR 3" Full Range Speaker System with 70.7/100V-16W Transformer

Model: FAP33T-WMSRP: $239.98

The AtlasIED FAP33T Strategy III is a 3" full range loudspeaker with next generation install technology. It is packed with new performance innovations at an affordable price point for every style of installation applications. If you require an i...n-ceiling loudspeaker with excellent speech intelligibility, crisp music reproduction, quick installation, and wide audience coverage, look no further - this is the Right Choice. We achieved these new standards by building upon the current Strategy Series excellent reputation and by extensive market research to make it even better. The results are outstanding and will have you choosing them for all your projects going forward. Retail stores, restaurants, recreational facilities, and even hotels, convention centers, and casinos have all changed their thinking on how an in-ceiling loudspeaker should perform. For many years, good enough was a loudspeaker that just played dull and lifeless sound. In today's world, good enough is no longer accepted because building owners want to increase their customer's experience by providing them the best of everything - including superb sound. The improved waveguide design provides wider coverage than previous models. The benefit is cost savings due to fewer loudspeakers required, while still maintaining uniform sound throughout. To enhance our low-frequency response and provide deeper bass definition, we optimized the low frequency tuning port. Additionally, the FAP33T is safety listed to both UL1480 and UL2043. In-ceiling loudspeakers are subjected to various climate and humidity environments. Competitive offerings use steel screws that can easily rust and fail due to humidity exposure. The FAP33T provides corrosion-free, no-worry operation, since it has no metal screws holding the doglegs in position. A new innovation is our Safety First Mounting System (SFMS). This technology prevents mounting tab damage during installation that other offerings suffer. The damage is caused by over torqueing during the installation process. This excessive torque can damage the mounting tabs that over time can increase the chance of mounting tab breakage and the loudspeaker falling from the ceiling. The SFMS is the result of over 100 tested prototypes until the final design was approved. This patent pending technology uses t-handles that are integrated into the front of the loudspeaker baffle to tighten the mounting tabs in materials as thin as sheet metal and up to 3/4". Another important benefit is faster installation times. The SFMS also decreases installation time by up to 60%. Its mounting design is simple install steps without the need for any tools. A front mounted 70V tap selector allows installers to quickly adjust and set the 70V power taps. A removable 4-pole euro-style connector allows for easy pre-wiring and daisy chaining of additional loudspeakers and subwoofers. The result is fewer labor costs and better profits.

Product Features:

Patented Safety First Mounting System Enables Installation without Drill or Screwdriver
Improved Waveguide Provides up to 135° Dispersion

Quick Quote View Details

Atlas - PAIR 4" Ceiling Speaker System With 70.7/100V-16W Transformer

Model: FAP40T-B

Designed to provide high performance in a very compact footprint, the FAP40T appeals to both system designers and architects. FAP40T is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and instituti...

Quick Quote View Details

Atlas - PAIR 4" Coaxial Speaker Sys w/Transformer

Model: FAP42TMSRP: $279.98

FAP42T combines superior coaxial loudspeaker performance with wide dispersion and easy installation. A low profile enclosure and wide coverage make the FAP42T a perfect choice for low ceilings. The FAP42T will satisfy the needs of owners, archit...

Quick Quote View Details

Atlas - PAIR 4" Coaxial Speaker Sys w/Transformer

Model: FAP42T-BMSRP: $279.98

FAP42T-B combines superior coaxial loudspeaker performance with wide dispersion and easy installation. A low profile enclosure and wide coverage make the FAP42T-B a perfect choice for low ceilings. The FAP42T-B will satisfy the needs of owners,...

Quick Quote View Details

Atlas - PAIR 4" COAXIAL SPEAKER, 70/100V 16W & 8 OHM BYPASS, UL2043 PLENUM RATED

Model: FAP42T-UL2043MSRP: $325.98

The new FAP42T-UL2043 from Atlas Sound meets requirements of UL 2043 for loudspeakers used in air handling (true plenum) spaces. FAP42T-UL2043 combines superior coaxial loudspeaker performance with wide dispersion and easy installation. A low p...

Quick Quote View Details

Atlas - STRAT 2, 4" 2-WAY SPKR SYSTEM WHITE

Model: FAP42T-WMSRP: $116.95

FAP42T combines superior coaxial speaker performance with wide dispersion and easy installation. A low profile enclosure and wide coverage make the FAP42T a perfect choice for low ceilings. The FAP42T will satisfy the needs of owners, architec...

Quick Quote View Details

Atlas - Pair 4" Coaxial Speaker Sys w/Transformer

Model: FAP42TCMSRP: $279.98

With an overall depth of 4 in. (102mm) the FAP42TC is the perfect choice when high fidelity audio and wide, even coverage is required but space above the plenum is limited. For wall mount applications (tanning salons or surround sound) the short...

Quick Quote View Details

Atlas - 4.5" Coaxial Speaker Sys with Transformer (Pair)

Model: FAP43T-WMSRP: $289.98

The AtlasIED FAP43T Strategy III 4.5" coaxial loudspeaker with next generation install technology. It is packed with new performance innovations at an affordable price point for every style of installation applications. If you require an in-ceil...ing loudspeaker with excellent speech intelligibility, crisp music reproduction, quick installation, and wide audience coverage, look no further - this is the Right Choice. We achieved these new standards by building upon the current Strategy Series excellent reputation and by extensive market research to make it even better. The results are outstanding and will have you choosing them for all your projects going forward. Retail stores, restaurants, recreational facilities, and even hotels, convention centers, and casinos have all changed their thinking on how an in-ceiling loudspeaker should perform. For many years, good enough was a loudspeaker that just played dull and lifeless sound. In today's world, good enough is no longer accepted because building owners want to increase their customer's experience by providing them the best of everything - including superb sound. The improved waveguide design provides wider coverage than previous models. The benefit is cost savings due to fewer loudspeakers required, while still maintaining uniform sound throughout. To enhance our low-frequency response and provide deeper bass definition, we optimized the low frequency tuning port. Additionally, the FAP43T is safety listed to both UL1480 and UL2043. In-ceiling loudspeakers are subjected to various climate and humidity environments. Competitive offerings use steel screws that can easily rust and fail due to humidity exposure. The FAP43T provides corrosion-free, no-worry operation, since it has no metal screws holding the doglegs in position. A new innovation is our Safety First Mounting System (SFMS). This technology prevents mounting tab damage during installation that other offerings suffer. The damage is caused by over torqueing during the installation process. This excessive torque can damage the mounting tabs that over time can increase the chance of mounting tab breakage and the loudspeaker falling from the ceiling. The SFMS is the result of over 100 tested prototypes until the final design was approved. This patent pending technology uses t-handles that are integrated into the front of the loudspeaker baffle to tighten the mounting tabs in materials as thin as sheet metal and up to 3/4". Another important benefit is faster installation times. The SFMS also decreases installation time by up to 60%. Its mounting design is simple install steps without the need for any tools. A front mounted 70V tap selector allows installers to quickly adjust and set the 70V power taps. A removable 4-pole euro-style connector allows for easy pre-wiring and daisy chaining of additional loudspeakers and subwoofers. The result is fewer labor costs and better profits.

Product Features:

Patented Safety First Mounting System Enables Installation without Drill or Screwdriver
Improved Waveguide Provides up to 110° Dispersion

Quick Quote View Details

Atlas - 6" Coaxial Speaker System w/ 70.7/100V-60W Transformer & 8 Bypass (PAIR)

Model: FAP6260TMSRP: $359.98

Model FAP6260T coaxial ceiling speaker is the evolution of the Strategy Series, delivering true, high fidelity sound reproduction in an attractive and easy-to-install system. These high performance systems are perfectly suited for many business ...

Quick Quote View Details

Atlas - Black Round Edgeless Grille Kit

Model: FAP63T-BERGMSRP: $33.99

Quick Quote View Details

Atlas - 6.5" Coaxial 2 way speakers White (Pair)

Model: FAP63T-WMSRP: $333.98

The AtlasIED FAP63T Strategy III is a 6.5" coaxial loudspeaker with next generation install technology. It is packed with new performance innovations at an affordable price point for every style of installation applications. If you require an in...-ceiling loudspeaker with excellent speech intelligibility, crisp music reproduction, quick installation, and wide audience coverage, look no further - this is the Right Choice. We achieved these new standards by building upon the current Strategy Series excellent reputation and by extensive market research to make it even better. The results are outstanding and will have you choosing them for all your projects going forward. Retail stores, restaurants, recreational facilities, and even hotels, convention centers, and casinos have all changed their thinking on how an in-ceiling loudspeaker should perform. For many years, good enough was a loudspeaker that just played dull and lifeless sound. In today's world, good enough is no longer accepted because building owners want to increase their customer's experience by providing them the best of everything - including superb sound. The improved waveguide design provides wider coverage than previous models. The benefit is cost savings due to fewer loudspeakers required, while still maintaining uniform sound throughout. To enhance our low-frequency response and provide deeper bass definition, we optimized the low frequency tuning port. Additionally, the FAP63T is safety listed to both UL1480 and UL2043. In-ceiling loudspeakers are subjected to various climate and humidity environments. Competitive offerings use steel screws that can easily rust and fail due to humidity exposure. The FAP63T provides corrosion-free, no-worry operation, since it has no metal screws holding the doglegs in position. A new innovation is our Safety First Mounting System (SFMS). This technology prevents mounting tab damage during installation that other offerings suffer. The damage is caused by over torqueing during the installation process. This excessive torque can damage the mounting tabs that over time can increase the chance of mounting tab breakage and the loudspeaker falling from the ceiling. The SFMS is the result of over 100 tested prototypes until the final design was approved. This patent pending technology uses t-handles that are integrated into the front of the speaker baffle to tighten the mounting tabs in materials as thin as sheet metal and up to 3/4". Another important benefit is faster installation times. The SFMS also decreases installation time by up to 60%. Its mounting design is simple install steps without the need for any tools. A front mounted 70V tap selector allows installers to quickly adjust and set the 70V power taps. A removable 4-pole euro-style connector allows for easy pre-wiring and daisy chaining of additional speakers and subwoofers. The result is fewer labor costs and better profits.

Product Features:

Patented Safety First Mounting System
Enables Installation without Drill or Screwdriver

Quick Quote View Details

Atlas - 6.5" Coaxial Speaker System with 70.7/100V-32W Transformer/8 BypassPkr

Model: FAP63TC-WMSRP: $383.98

The AtlasIED FAP63TC-W Strategy III is a 6.5" coaxial speaker designed for applications where shallow mounting depth is required. If you require an in-ceiling speaker with excellent speech intelligibility, crisp music reproduction, and wide audi...

Quick Quote View Details

Atlas - PAIR 6.5" COAXIAL IN-CEILING SPEAKER W/ 32-WATT 70V/100V TRANSFMR

Model: FAP63TUC-WMSRP: $355.98

General DescriptionThe FAP63TUC-W's 130o dispersion angle can reduce the number of loudspeakers necessary to achieve coverage in distributed systems with low ceilings. The loudspeaker component matches the performance of the legendary AtlasIED F...

Quick Quote View Details

Atlas - 8" Coaxial Speaker System w/Transformer (pair).

Model: FAP82TMSRP: $503.98

The Atlas Sound FAP82T is a premium performance 70.7/100V tuned & ported 8" coaxial ceiling speaker system perfectly suited for many business music and public address applications -especially applications where high ceilings require loudspea...

Quick Quote View Details

Atlas - 8" 2-Way Comp DR Coax Speaker System T60, Priced Each/Sold as Pair

Model: FAP8CXTMSRP: $417.99

The Atlas Sound FAP8CXT is a true compression driver premium performance 70.7V / 100V tuned & ported 8" coaxial ceiling speaker system perfectly suited for many business music and public address applications -especially applications where hi...

Quick Quote View Details

Atlas - 8" Subwoofer Loudspeaker System

Model: FAPSUB-1MSRP: $318.99

The FAPSUB-1 adds impressive low frequency response to any full range distributed system The FAPSUB-1 consists of a highly efficient 8", 8 ohm subwoofer designed and built by Atlas Sound to work optimality in the FAPSUB-1 enclosure system. A hig...

Quick Quote View Details

Atlas - 4" Loudspeaker 10W / 8 Ohm

Model: FC104MSRP: $28.99

This compact, full-range, 4" (127mm) loudspeaker is equipped with a damped, high-compliance cone which provides excellent low frequency reproduction and smooth extended response. Model FC104 also offers a wide dispersion angle which reduces the ...

Quick Quote View Details

Atlas - 4" Loudspeaker with 70.7V-8W Transformer

Model: FC104TMSRP: $57.99

This compact, full-range, 4" (127mm) loudspeaker is equipped with a damped, high-compliance cone which provides excellent low frequency reproduction and smooth extended response. Model FC104T also offers a wide dispersion angle which reduces th...

Quick Quote View Details

Atlas - 4" Ceiling Speaker wiht Transformer

Model: FC104T72MSRP: $61.99

This compact, full-range, 4" (127mm) loudspeaker with a LT-72 transformer is equipped with a damped, high-compliance cone which provides excellent low frequency reproduction and smooth extended response. Model FC104 also offers a wide dispersion...

Quick Quote View Details

Atlas - Pre-assembled baffle, 5 oz 8" Loudspeaker 25/70.7V-4W xfmr/62-8

Model: FD72WMSRP: $48.99

Model FD72W is a cost effective assembly that include high-quality 8" speaker, 25V/70.7V transformer and screw type grill. The FD72W features a conventional cone design speaker with a 1" diameter voice coil to reproduce voice and music with exce...

Quick Quote View Details

Atlas - 8" IN-CEILING LOUDPEAKER ASSEMBLY W 25V/70.7V TRANSFORMER BAFFLE

Model: FD72W-HCMSRP: $78.99

Model FD72W-HC is a cost effective assembly that includes high-quality 8" loudspeaker, 25V/70.7V transformer and Hyfidrophobic® treated screw type grill. The FD72W-HC features a conventional cone design loudspeaker with a 1" diameter voice c...

Quick Quote View Details

Category

Price

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features: