Buy High Performance, Wide Coverage Audio Products

Model: FP-PA20B MSRP: $273.68

Quick Quote View Details

RDL - Audio Amplifier 35 W, 25 V / 70 V / 100 V with Power Supply

Model: FP-PA35A MSRP: $413.06

The FP-PA35A is the ideal choice in many applications where multiple 25 V, 70 V or 100 V speakers in a zone need to be powered from a single audio power amplifier. The FP-PA35A features a balanced line level input that may be connected unbalance...d. A front panel gain control is designed to be adjusted manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. Multiple distributed sound system speakers connect to the corresponding 25 V, 70 V or 100 V amplified output. The FP-PA35A includes an analog compressor/limiter for audio fidelity audibly superior to conventional class D amplifiers with digital limiting. The input GAIN setting determines whether the limiter alone is used for clipping suppression, or if the full compressor/limiter will be used to substantially increase the average output power beyond that of a standard 35 W amplifier. A red COMPRESSION LED flashes when the limiter is preventing output clipping. Normal audio level signals remain unaffected by the compressor thereby preserving audio dynamics. If the input level is increased so that the compressor is active, the LED remains dimly lit between peak flashes. The audio is compressed according to three dynamic time constants providing aural transparency while maintaining clean, unclipped amplified audio for input overloads of up to 20 dB. The FP-PA35A, with compression, is capable of producing average audio output levels and clarity normally expected from amplifiers with a much higher output power rating. The FP-PA35A circuits are all designed for low power consumption. In the absence of an audio input, a digital timer is enabled to switch the class D output stage off. When this sleep mode is active, the amplifier module and its included RDL power supply consume less than 1 W of mains power. A front-panel control sets the sleep mode delay timer to 5, 15 or 25 minutes. The control also permits the installer to bypass the sleep mode to conform to system specifications that require the amplifier to be active at all times. Upon detection of an input signal, the amplifier is nearly inaudibly and instantly restored to full operation within 150 milliseconds. A blue POWER LED illuminates when the FP-PA35A is powered from its external 24 Vdc power supply. The power LED is dimly illuminated when the sleep mode disables the amplifier and glows brightly when the amplifier operation is fully enabled. The module is equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stage produces minimal heat for all levels of expected voice or music modulation. Continuous full-power operation with audio tones will not damage the amplifier, but is not recommended.

Product Features:

35 Watts RMS Constant Voltage Amplifier
25 V, 70 V or 100 V Output
Plenum Rated per UL 2043 Standard

Quick Quote View Details

RDL - 3 Band Parametric Equalizer-Terminals/Phono Jacks

Model: FP-PEQ3 MSRP: $516.69

Quick Quote View Details

RDL - Power Supply Mounting Bracket

Model: FP-PSB1A MSRP: $65.84

The FP-PSB1A mounts one desktop style power supply and it includes a provision to mount other modules. Any RDL FP-PA20 type audio power amplifier can mount directly to the FP-PSB1A. RDL offers mounting brackets for mounting other RDL modules in ...

Quick Quote View Details

RDL - Rack Adapter FLAT-PAK Series-19 in. Fixed

Model: FP-RRA MSRP: $110.72

FLAT-PAK modules slide into FP-RRA mounting track 2 RU.Modules lock into position with optional FP-CT1.

Device Supported: Modular Device
Height: 3.47"
Width: 19"

Quick Quote View Details

RDL - Rack Adapter FLAT-PAK Series-19 in. Hinged

Model: FP-RRAH MSRP: $140.68

FP-RRAH hinged panel provides easy module access

Device Supported: Modular Device
Height: 3.47"
Width: 19"

Quick Quote View Details

RDL - Rear rack rail mounting kit for any FLAT-PAK module

Model: FP-RRB1 MSRP: $22.34

The FP-RRB1 mounting kit contains two brackets to attach a FLAT-PAK module to a rear rack rail or to any flat surface.

Application/Usage: Module
Application/Usage: Rack
Application/Usage: Chassis

Quick Quote View Details

RDL - SPDIF Repeater / Amplifier

Model: FP-SPR1 MSRP: $282.46

Quick Quote View Details

RDL - Power Inserter-Twisted Pair-four sets of outputs-signal loop-through

Model: FP-TP4PW MSRP: $327.37

Quick Quote View Details

RDL - Format-A Two-Pair Audio Sender (Compatible with Guest Room Audio System)

Model: FP-TPS4A MSRP: $268.54

Quick Quote View Details

RDL - Format-A Audio Sender/Receiver (Compatible with Guest Room Audio System)

Model: FP-TPSR4A MSRP: $364.42

Quick Quote View Details

RDL - Format-A Twisted Pair Remote Controlled Mixer

Model: FP-TPX3A MSRP: $618.45

The FP-TPX3A is the ideal choice where a user-accessible mixer must control the volume of multiple sources in a zone. RDL Format-A twisted pair audio senders connect directly to the mixer, allowing each user input to be balanced or unbalanced, m...ic or line level. FP TPX3A outputs are provided in balanced and unbalanced formats. Two unbalanced outputs are available to feed the mono mixer output to a stereo amplifier input. Remote control of the mixer allows audio signals to be kept at a single equipment location. Audio is mixed by VCA circuits that are adjusted by control signals from the remote control. Two Format-A jacks are provided for signal inputs. If the Format-A senders are daisy-chained, only one of the input jacks is used. Two jacks are provided so that two home runs from Format-A senders are possible. The FP-TPX3A provides power to all connected active senders. The FP-TPX3A is designed to mix the three Format-A audio signals from pairs A, B and C. A detachable terminal block allows a LOCAL INPUT to be connected directly to pair C. This input may be used if no connected sender is set to use pair C. The terminal block is included so a local paging or music source can be connected if pair C would not otherwise be used. Each INPUT GAIN control is calibrated to be adjusted clockwise for an unbalanced passive sender; counter-clockwise for an active sender or passive sender with a balanced input. A standard RDL dual-LED VU meter provides visual indication of the output level from the mixer. The mixer output is mono. The output is available on a single balanced detachable terminal block or on two unbalanced RCA jacks intended to connect directly to the stereo input of a power amplifier. The AUDIO LED illuminates whenever audio is present at the output of the mixer, defined as greater than 35 dB below +4 dBu. This threshold triggers the AUDIO DETECT OUTPUTS. Two open collectors are provided on a detachable terminal block. One of these terminals switches low when audio is present, and may be used to switch amplifiers or other system components on. The other terminal is pulled low when audio is not present. It is intended for muting the digital carrier of power amplifiers equipped for remote muting. Either of these terminals may be used to trigger a variety of other RDL modules or OEM equipment. The use of these terminals to shut down unused equipment can produce effective system energy and cost savings. These control terminals normally remain triggered for 10 minutes after audio is absent. The delay can be increased to 20 minutes using a ground jumper on the terminal block. The mixer levels are set by RDL remote controls that connect directly to the FP-TPX3A through an RJ45 jack using standard twisted pair cable. The control ports on the mixer and remote controls are color-coded light blue to distinguish them from standard Format-A jacks. The mixer provides power to the remote control. Either a two or three channel remote control may be used. If remote mixing of only two channels is needed, a two channel remote may be used. Pair C becomes the input channel that is not remotely controlled. The PAIR C/LOCAL INPUT can be left active at unity gain, typically for a paging source, or may be disabled by a switch set during installation. If the cable connected to the remote control becomes disconnected, the mixer output mutes.

Product Features:

3-Channel Remote-Controlled Audio Mixer
VCA Level Control for Each Input Pair
Format-A Twisted Pair Inputs

Quick Quote View Details

RDL - Unbalanced to Balanced Converter-2 Channel

Model: FP-UBC2 MSRP: $335.80

Quick Quote View Details

RDL - Unbalanced to Balanced Converter-6 Channel

Model: FP-UBC6 MSRP: $720.08

Quick Quote View Details

RDL - NTSC/PAL Video Distribution Amp-1x4-BNC

Model: FP-VDA4 MSRP: $389.73

The FP-VDA4 is the ideal choice in many applications where video signals need to be distributed. Video input and output connections are made on the top-panel BNC jacks. Power connections are made using either the full-size barrier block terminal...

Quick Quote View Details

Audix - 5-piece Fusion Drum Mic P ackage

Model: FP5 MSRP: $379.00

The Fusion Series microphones, which are designed, assembled and tested by Audix in the USA, fulfill all the performance criteria required for professional stage and studio applications. These prepackaged sets of microphones offer convenience, q...uality, durability, and affordability. All mics come with high impact mic stand adapters and are packed in a heavy duty foam lined aluminum carrying case for safe keeping when the products are not in use. The f5 is characterized with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a LM#8482; Type A (Low Mass) diaphragm for natural, accurate sound reproduction. The f5 is sturdy, compact and easy to position. With a wide frequency response of 55 Hz 15 kHz, the f5 provides clear, accurate, natural sound reproduction without having to rely on EQ. Other features include roadworthy construction, precision cast zinc alloy body, steel mesh grill, black coat finish, laser etched model number, gold XLR connector and a heavy duty nylon mic clip. The f2 is characterized with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a LM#8482; Type A (Low Mass) diaphragm for natural, accurate sound reproduction. The f2 is lightweight, compact and easy to position. With a wide frequency response of 52 Hz - 15 kHz and the ability to handle sound pressure levels of 139 dB. Other features include roadworthy construction, a precision cast zinc alloy body, black coat finish, laser etched model, steel mesh grill, gold XLR connector and a tension-fit heavy duty nylon mic clip. The f6, which is characterized with a hypercardioid pickup pattern for isolation and feedback control, is equipped with a LM#8482; Type A (Low Mass) diaphragm for natural, accurate sound reproduction. The f6 is lightweight, compact and easy to position. With a wide frequency response of 40 Hz - 16 kHz and the ability to handle sound pressure levels of 140 dB, the f6 is an excellent choice for miking kick drum and instruments requiring extended low frequency reproduction such as large toms and bass cabinets, leslie bottom, cajon. Roadworthy construction includes a precision cast zinc alloy body, black coat finish, laser etched model and serial number, steel mesh grill, gold XLR connector and a tension-fit heavy duty nylon mic clip.

Quick Quote View Details

Audix - 7-piece Fusion Drum Mic P ackage

Model: FP7 MSRP: $499.00

The Fusion Series microphones, which are designed, assembled and tested by Audix in the USA, fulfill all the performance criteria required for professional stage and studio applications. These prepackaged sets of microphones offer convenience, q...uality, durability, and affordability. All mics come with high impact mic stand adapters and are packed in a heavy duty foam lined aluminum carrying case for safe keeping when the products are not in use. The f5 is characterized with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a LM#8482; Type A (Low Mass) diaphragm for natural, accurate sound reproduction. The f5 is sturdy, compact and easy to position. With a wide frequency response of 55 Hz 15 kHz, the f5 provides clear, accurate, natural sound reproduction without having to rely on EQ. Other features include roadworthy construction, precision cast zinc alloy body, steel mesh grill, black coat finish, laser etched model number, gold XLR connector and a heavy duty nylon mic clip. The f2 is characterized with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a LM#8482; Type A (Low Mass) diaphragm for natural, accurate sound reproduction. The f2 is lightweight, compact and easy to position. With a wide frequency response of 52 Hz - 15 kHz and the ability to handle sound pressure levels of 139 dB. Other features include roadworthy construction, a precision cast zinc alloy body, black coat finish, laser etched model, steel mesh grill, gold XLR connector and a tension-fit heavy duty nylon mic clip. The f6, which is characterized with a hypercardioid pickup pattern for isolation and feedback control, is equipped with a LM#8482; Type A (Low Mass) diaphragm for natural, accurate sound reproduction. The f6 is lightweight, compact and easy to position. With a wide frequency response of 40 Hz - 16 kHz and the ability to handle sound pressure levels of 140 dB, the f6 is an excellent choice for miking kick drum and instruments requiring extended low frequency reproduction such as large toms and bass cabinets, leslie bottom, cajon. Roadworthy construction includes a precision cast zinc alloy body, black coat finish, laser etched model and serial number, steel mesh grill, gold XLR connector and a tension-fit heavy duty nylon mic clip. The f9 is a professional pre-polarized condenser microphone used for stage and studio applications. The f9 is known for its clear, accurate response particularly in the upper frequen

Quick Quote View Details

ASHLY - Fader Remote, Network Programmable 8-Chan + Master (WMNT or tabletop)Amp

Model: FR-8 MSRP: $849.00

FR-8andFR-16are Ethernet devices that provide fader-basedremote level control for Ashly products having DSP capa-bilities. The FR-8 controls up-to eight user assigned inputs,outputs, or mixer outputs, and theFR-16controls up-to 16. Both models a...

Quick Quote View Details

ASHLY - Rack-Mount Kit for FR-8 Fader Remote

Model: FR8-RMK MSRP: $99.00

The FR8-RMK rack kit takes the FR-8 Fader Remote and places it securely in a standard 19" rack installation

Compatibility: Ashly FR-8 Remote Level Control
Suitable for use with FR-8 fader network remote

Quick Quote View Details

ADJ - FOLLOWSPOT WITH 575W HALOGEN

Model: FS-1000 MSRP: $413.95

The FS-1000 high powered, affordable followspot contains a 575W halogen lamp in an extruded aluminum case. This unit gives as much or more output as a 1,000W lamp while using less power than its competitors. Includes hanging bracket, but tripod ...

Quick Quote View Details

ADJ - FS-1000 WITH LTS-6 STAND

Model: FS-1000/SYS MSRP: $475.95

The FS-1000 high powered, affordable followspot contains a 575W halogen lamp in an extruded aluminum case. This unit gives as much or more output as a 1,000W lamp while using less power than its competitors. Includes hanging bracket and LTS-5 tr...

Quick Quote View Details

ADJ - COLOR CHANGER ADAPTER FS-600 or A

Model: FS-6C MSRP: $94.95

The FS-6C from American DJ is a color-changing adapter to be used instead of separate color gels on ADJ Followspot systems. Compatible with FS-1000, FS-1000/AS, and FS-600/A (sold separately). The FS-6C is a color-changing adapter designed to be...

Quick Quote View Details

ADJ - KNOB AND SLEEVE FOR LTS-6

Model: FS-ADAPTER MSRP: $8.95

Device Supported: Spotlight
Device Supported: Lighting Fixture
Application/Usage: Stand

Quick Quote View Details

Atlas - Horn pole mount bracket

Model: FS-PMBRKT MSRP: $98.99

The FS-PMBRKT is a bracket designed to enable a FS Series horn speaker to be mounted to a tripod speaker stand like the AtlasIED SS500E. The unit attaches directly to existing mounting points on the FS horn bracket and seats directly onto the SS...

Quick Quote View Details

Atlas - 12" FS Series Arena Horn with 65x65 degree dispersion

Model: FS12T-66 MSRP: $1403.99

Features Ideal for a Wide Array of Outdoor and Indoor Applications Integrated 400-Watt 70.7V Transformer Constant Directivity Design Offers Controlled Coverage of 60° Horizontal by 60° Vertical All-Weather Construction Ensures Long-Term...

Quick Quote View Details

Atlas - 12" FS Series Arena Horn with 90 x 40 Degree Dispersion

Model: FS12T-94 MSRP: $1403.99

Features Ideal for a Wide Array of Outdoor and Indoor Applications Integrated 400-Watt 70.7V Transformer Constant Directivity Design Offers Controlled Coverage of 90° Horizontal by 40° Vertical All-Weather Construction Ensures Long-Term...

Quick Quote View Details

ADJ - FS3000LED 300W Warm W COB LED follow spo

Model: FS3000 MSRP: $2399.95

The FS3000LED is a powerful and feature-packed follow spot powered by a 300W white C.O.B. (Chip On Board) LED with a color temperature of 6000K.The FS3000LED is a powerful and feature-packed follow spot that is joining ADJ's range of theatrical ...

Quick Quote View Details

ADJ - FS3000 SYS

Model: FS3000 SYS MSRP: $2479.95

Professional Followspot system comprising of one ADJ FS3000LED Followspot and one ADJ Pro Followspot Stand.

Quick Quote View Details

ADJ - PRO Follow Spot Stand

Model: FSS300 MSRP: $97.95

The Pro FS Stand is a black lighting tripod stand for use with most follow spots and ellipsoidals. Compatible with ADJ's FS Pan Glide. Made of aluminum and steel construction and is very stable. Sets up quickly and easily with tightening knobs. ...

Quick Quote View Details

ADJ - FURIOUS FIVE RG 5 effects in 1 light

Model: FURIOUS FIVE RG MSRP: $299.95

Quick Quote View Details

Hamilton BUHL - Favorite Black-Mid Size Ear Cup;Wide headband

Model: FV-BLK MSRP: $22.99

The HamiltonBuhl Favoritz line of headsets are cool for school and at home, too! The latest design has a sleek appearance and offers rugged durability and comfort for everyday use. Kids and adults will be glad to sport our newest mid-sized head...

Quick Quote View Details

Hamilton BUHL - Gray- Mid Size Ear Cup

Model: FV-GRY MSRP: $22.99

The HamiltonBuhl Favoritz line of headsets are cool for school and at home, too! The latest design has a sleek appearance and offers rugged durability and comfort for everyday use.Kids and adults will be glad to sport our newest mid-sized headse...

Quick Quote View Details

Hamilton BUHL - 50 Pack of Favoritz - Gray Headset - Mid Size Ear Cup, Wide headband

Model: FVGRY-50 MSRP: $1074.99

The HamiltonBuhl Favoritz series of headsets are cool for school! The latest headset design has a sleek appearance and offers rugged durability for everyday use. Now, the popular gray Favoritz come in a pack of 50 TRRS headsets – ideal for schoo...

Quick Quote View Details

Williams Sound - Cloth-based; loop; flat warning tape

Model: FWT 001 MSRP: $150.00

Quick Quote View Details