Category

  • Audio Playback & Recording
  • Soundbars
  • Headphones
  • Speakers
  • Speaker Accessories
  • Amplifiers
  • Amplifier Accessories
  • Wired Microphones
  • Wired Microphone Accessories
  • Wireless Microphones
  • Wireless Microphone Access.
  • Unified Communications
  • Processors, DIs & Interfaces
  • Mixers & Zone Processors
  • Mixer Accessories
  • Assistive Listening
  • Telephone & Paging
  • Cases & Bags
  • Accessories

Brand

  • ADJ
  • AKG
  • AMX
  • Ashly Audio
  • AtlasIED
  • Atlona
  • Audio Technica
  • Audix
  • AV Pro Edge
  • AVer
  • beyerdynamic
  • Bose
  • BSS
  • C2G
  • ClearOne
  • Crown
  • dbx
  • DENON
  • Dynacord
  • Electro-Voice
  • Epson
  • Hamilton BUHL
  • HuddleCamHD
  • Jabra
  • JBL
  • Kramer
  • LEA Professional
  • Lenovo
  • Lexicon
  • Listen Technologies
  • Lumens
  • Marantz
  • Martin Lighting
  • MaxHub
  • Mustang Professional
  • MuxLab
  • MXL
  • Nureva
  • Panasonic
  • Premier Mounts
  • Radio Design Labs
  • RANE
  • Roland
  • Samsung Televisions
  • Sanus Mounts
  • Sennheiser
  • SHARP
  • Shure
  • Sony
  • Soundcraft
  • Stem Audio by Shure
  • TASCAM
  • Toa
  • tvONE
  • Vaddio
  • Williams Sound
  • WyreStorm
  • Yamaha
  • Yealink Network

Digital Inverter Compressor

Type

  • Body Pack
  • Handheld
  • Full-Range

Frequency Range

  • 36 Hz to 40 kHz
  • 5Hz-25kHz
  • 48 MHz to 862 MHz
  • 470 MHz to 866 MHz
  • 470 MHz to 550 MHz
  • 50Hz to 20kHz
  • 500-530 MHz
  • 50 MHz to 858 MHz
  • 30Hz - 15KHz
  • 150 kHz Horizontal
  • 423 MHz
  • 100 kHz
  • 90Hz - 15kHz
  • 54 MHz to 864 MHz
  • 400 MHz
  • 81 Hz – 20 kHz *1
  • 34 kHz to 60 kHz
  • 46Hz - 160Hz
  • 470 to 542 MHz
  • 20 Hz to 20 kHz
  • 150Hz - 17kHz
  • 530-560 MHz
  • 180Hz - 10kHz
  • 70 Hz - 20 kHz
  • 62Hz – 20kHz
  • 60 Hz to 17 kHz (at 0.33' / 10.06 cm)
  • 40 Hz – 20 kHz
  • 50Hz – 25kHz
  • 1.88 kHz to 1.90 kHz
  • 1.92 GHz to 1.93 GHz
  • 1.88 GHz to 1.90 GHz
  • 566 to 590MHz
  • 52 Hz - 20 kHz
  • 32 Hz - 1 kHz
  • 40 Hz – 150 Hz

Bridge Element

Price

to search

Receiver Type

  • Rack Mount

Microphone Type

  • Over Ear
  • Detachable
  • Lavalier
  • Stand Mountable
  • Podium
  • Boom
  • Shoe Mount
  • Table Mount
  • Button
  • Headworn
  • Drum Mount
  • Handheld
  • Shock Mount
  • Flush Mount
  • Piano Mount
  • Clip-on
  • Gooseneck
  • Clamp Mount
  • Neckworn
  • Hanging
  • Lapel
  • Shotgun
  • Surface Mount
  • Desktop
  • Wall Mount
  • Ceiling Mount
  • Dynamic
  • Camera Mount
  • Digital

Polar Pattern

  • Supercardioid
  • Hypercardioid
  • Omnidirectional
  • Cardioid
  • hemispherical

Number of Battery & Surge Outlets

  • 4
  • 5
  • 6
Model: MTC-19MR MSRP: $335.00
The MTC-19MR is a mud ring construction bracket (plaster ring) with a circular offset, forming a edge guide for sheet rock plastering.
  • Device Supported: Subwoofer
  • Compatibility: <p><b>JBL Control Subwoofers:</b></p><ul><li>19CS</li><li>19CST</li></ul>
  • Country of Origin: China
Model: MTC-19NC MSRP: $234.00
Optional new construction bracket for Control 19 ceiling spkrs, 6 pcs
  • Device Supported: Subwoofer
  • Product Material: Steel
  • Length: 25.20"
Model: MTC-200BB6 MSRP: $99.00
Backcan for Control 227C & CT Medium Format In-Ceiling Loudspeakers
  • Extra-thick 16 gauge metal construction
  • Lined with 12 mm (1/2 in) thick MDF to eliminate resonances and to provide extra bass response
  • Knockouts on top and side
Model: MTC-210UB MSRP: $133.59
The JBL MTC-210UB is a versatile mounting U-bracket for the Control SB-210 indoor/outdoor installation subwoofer, allowing for precise and flexible angling and positioning of the speaker in a variety of applications and locales.
  • Device Supported: Speaker
  • Product Color: Black
  • Compatibility: <p>JBL SB210 Subwoofer</p>
Model: MTC-210UB-WH MSRP: $133.59
The new MTC-210UB(-WH) optional U-Bracket accessory is designed for use with the JBL Professional Control SB210 subwoofer. The U-Bracket allows installation of the enclosure to flat sturdy surfaces, while enabling an axis of rotation.The MTC-210...
Model: MTC-23CM MSRP: $22.00
Your JBL ceiling-mount adapter allows Control Contractor Series loudspeakers to be installed hanging down from a ceiling or beam. The adapter does not come with a base and requires the use of your existing Invisiball base (which comes with your ...
Model: MTC-23CM-WH MSRP: $30.00
Your JBL ceiling-mount adapter allows Control Contractor Series loudspeakers to be installed hanging down from a ceiling or beam. The adapter does not come with a base and requires the use of your existing Invisiball base (which comes with your ...
Model: MTC-23UB-1 MSRP: $40.17
The MTC-23UB-1 is a yolk-type U-bracket for control 23-1 ultra-compact indoor/outdoor background/foreground speaker.
  • Device Supported: Speaker
  • Product Color: Black
  • Compatibility: JBL Professional Control 23-1 Speaker
Model: MTC-23UB-1-WH MSRP: $55.00
The MTC-23UB-1-WH is a yolk-type U-bracket for control 23-1 ultra-compact indoor/outdoor background/foreground speaker.
  • Suitable for use with control 23-1 speaker
  • Available in white
Model: MTC-23WMG-1 MSRP: $49.00
The MTC-23WMG-1 is a highly zinc-plated, finished in durable TGIC polyester powder-coating available with WeatherMaxtrade; multi-layer foam and tight-weave mesh vapour barrier backing. It is suitable for use with control 23-1 ultra-compact indoo...
Model: MTC-23WMG-1-WH MSRP: $49.00
The MTC-23WMG-1-WH is a highly zinc-plated, finished in durable TGIC polyester powder-coating available with WeatherMaxtrade; multi-layer foam and tight-weave mesh vapour barrier backing. It is suitable for use with control 23-1 ultra-compact in...
Model: MTC-24MR MSRP: $195.00
The MTC-24MR is a mud ring construction bracket (plaster ring) with a circular offset, forming an edge guide for sheet rock plastering.
  • Device Supported: Speaker
  • Compatibility: <p>JBL Speakers:</p><ul><li>24C</li><li>24C Micro</li></ul>
  • Country of Origin: China
Model: MTC-24NC MSRP: $151.00
The JBL MTC-24NC is a flat sheetmetal mounting bracket with wings for direct attachment to a building structure that installs before sheetrock as a cutout template. The 6-piece package is designed specifically for mounting the JBL Control 24C an...
Model: MTC-25UB-1 MSRP: $72.00
The MTC-25UB-1 is a yolk-type U-bracket for control 25-1 ultra-compact indoor/outdoor background/foreground speaker.
  • Device Supported: Speaker
  • Product Color: Black
  • Compatibility: JBL Professional Control 28-1 Speaker
Model: MTC-25WMG-1 MSRP: $68.00
The MTC-25WMG-1 is a highly zinc-plated, finished in durable TGIC polyester powder-coating available with WeatherMaxtrade; multi-layer foam and tight-weave mesh vapour barrier backing. It is suitable for use with control 25-1 ultra-compact indoo...
Model: MTC-25WMG-1-WH MSRP: $95.00
The MTC-25WMG-1-WH is a highly zinc-plated, finished in durable TGIC polyester powder-coating available with WeatherMaxtrade; multi-layer foam and tight-weave mesh vapour barrier backing. It is suitable for use with control 25-1 ultra-compact in...
Model: MTC-26MR MSRP: $232.00
Mud Ring (plaster ring) with a circular offset, forming a edge guide for sheet rock plastering. Installs before sheetrock, Integral Ring Extension for Drywall mudding
  • MTC-26MR for Models, Control 26C, Control 26CT
Model: MTC-26TR MSRP: $203.00
Trim rings allow installation of Control Contractor ceiling speakers into existing ceiling speaker cutouts that are larger than the speaker's normal cutout size. The maximum cutout size accommodated depends on the installation configuration.
  • Device Supported: Speaker
  • Product Color: White
  • Product Material: Steel
Model: MTC-28/25CM MSRP: $39.14
Your JBL ceiling-mount adapter allows Control Contractor Series loudspeakers hanging down from a ceiling or beam. The adapter does not come with of your existing Invisiball base (which comes with your loudspeaker).
  • Device Supported: Speaker
  • Product Color: Black
  • Compatibility: <p><b>JBL CONTROL Speaker:</b></p><ul><li>25</li><li>28<br><br></li></ul>
Model: MTC-28/25CM-WH MSRP: $39.14
Ceiling-mount adapter allows control contractor series loudspeakers to be installed hanging down from a ceiling or beam. The adapter does not come with a base and requires the use of existing Invisiball base (which comes with loudspeaker). Use w...
Model: MTC-28UB-1 MSRP: $91.00
The MTC-28UB-1 is a yolk-type U-bracket for control 28-1L high-output 8-ohm indoor/outdoor background/foreground speaker.
  • Device Supported: Speaker
  • Product Color: Black
  • Compatibility: JBL Professional Control 28-1 Speaker
Model: MTC-28WMG-1 MSRP: $95.00
The MTC-28WMG-1 is a highly zinc-plated, finished in durable TGIC polyester powder-coating available with WeatherMax multi-layer foam and tight-weave mesh vapour barrier backing. It is suitable for use with control 28-1L high-output 8-ohm indoor...
Model: MTC-28WMG-1-WH MSRP: $135.00
The MTC-28WMG-1-WH is a highly zinc-plated, finished in durable TGIC polyester powder-coating available with WeatherMaxtrade; multi-layer foam and tight-weave mesh vapour barrier backing. It is suitable for use with control 28-1L high-output 8-o...
Model: MTC-29CM MSRP: $40.00
The new MTC-29CM InvisiBall Assembly is designed for use with the JBL Professional Control 29AV Loudspeaker. The Ceiling Mount allows installation of the enclosure to sturdy ceiling structures by utilizing the internal InvisiBall mechanism.
  • Device Supported: Speaker
  • Product Color: Black
  • Weight (Approximate): 5 lb
Model: MTC-29CM-WH MSRP: $40.00
The new MTC-29CM InvisiBall Assembly is designed for use with the JBL Professional Control 29AV Loudspeaker. The Ceiling Mount allows installation of the enclosure to sturdy ceiling structures by utilizing the internal InvisiBall mechanism.
  • Device Supported: Speaker
  • Product Color: White
  • Compatibility: <p>JBL Professional Control 29AV Loudspeaker</p>
Model: MTC-29UB-WH MSRP: $105.06
The MTC-29UB bracket mounts for the control 29AV loudspeaker to the walls, decks and ceilings and provides a degree of swiveling capability. Read and follow these instructions carefully before beginning. Installing speakers must be performed by ...
Model: MTC-2P MSRP: $34.20
The Control 2P Master Speaker and Extension Speaker can be wall-mounted using the optional MTC-2P mounting kit.
  • Device Supported: Speaker
  • Compatibility: <p><b>JBL Control Speaker:</b></p><ul><li>2P Master</li><li>Extension<br><br></li></ul>
  • Country of Origin: China
Model: MTC-300BB12 MSRP: $349.00
The JBL MTC-300BB12 is a rectangular, 3 cubic foot backcan for any of the 12" JBL Control 300 Series speaker models
  • Extra-thick 16 gauge metal construction
  • Lined with 12 mm (½ inch) thick MDF to eliminate resonances and to provide extra bass response
  • Knockouts on top and all four sides
Model: MTC-300BB8 MSRP: $122.00
The MTC-300BB8 is a round, 1 cu. ft. backcan for the Control 328C 328CT loudspeakers.
  • Extra-thick 16 gauge metal construction
  • Lined with 12 mm (&#189; inch) thick MDF to eliminate resonances and to provide extra bass response
  • Knockouts on top and side
Model: MTC-300SG12 MSRP: $60.00
JBL's MTC-300SG12 Square Speaker Grille features an upscale white look. This grille is made from rugged 19-gauge steel and has zinc underplating to prevent rust and scratches. Made for the Control 300 Series 12" Drivers, this grille will add sty...
Model: MTC-300T150 MSRP: $115.00
The MTC-300T150 is an optional higher power 150W transformer for applications requiring higher output levels. Ideal for use on either 70V or 100V distributed loudspeaker lines.
  • Optional higher power 150W transformer for applications requiring higher output levels
Model: MTC-30CM-WH MSRP: $45.32
The MTC-30CM Invisiball Assembly is designed for use with the JBL Professional Control 30 Loudspeaker System. The Ceiling Mount allows installation of the enclosure to sturdy ceiling structures by utilizing the internal Invisiball mechanism.
  • Device Supported: Speaker
  • Product Color: White
  • Compatibility: <p>JBL Professional Control 30 Loudspeaker System</p>
Model: MTC-30MK MSRP: $187.00
The MTC-30MK is marine grille kit for control 30 loudspeaker. Consisting of grille and protective covers for baffle screws.
  • Marine grille kit for control 30 loudspeaker
  • Consisting of grille and protective covers for baffle screws
Model: MTC-30UB MSRP: $115.00
The new MTC-30UB optional U-Bracket accessory is designed for use with the JBL Professional Control 30. The U-Bracket allows installation of the enclosure to flat sturdy surfaces when the included InvisiBall Mounting Structure is not appropriate...
Model: MTC-30UB-WH MSRP: $114.33
The new MTC-30UB(-WH) optional U-Bracket accessory is designed for use with the JBL Professional Control 30. The U-Bracket allows installation of the enclosure to flat sturdy surfaces when the included InvisiBall Mounting Structure is not approp...
Model: MTC-47MR MSRP: $335.00
Mud-ring (plaster ring) bracket for control 47C/T and control 47LP speaker with a circular offset, forming a edge guide for sheet rock plastering.
  • For control 47C/T and control 47LP speaker
  • With a circular offset
  • Forming a edge guide for sheet rock plastering
Model: MTC-47NC MSRP: $241.02
Construction bracket for control 47C/T and control 47LP speaker. It is made of flat sheet metal, with wings to attach to the building structure.
  • Made of flat sheet metal
  • With wings to attach to the building structure
  • For control 47C/T and control 47LP speaker
Model: MTC-8124C MSRP: $60.00
The MTC-8124C is an integral clip for the MTC-RAIL that spread ceiling loading. There are four pieces per carton.
  • Device Supported: Speaker
  • Diameter: 4"
  • Compatibility: <p>JBL Professional 8124 In-Ceiling Loudspeaker</p>
Model: MTC-8128C MSRP: $92.00
The MTC-8128C is integral clips for the MTC-RAIL that spread ceiling loading. There are four pieces per carton.
  • Integral clips for the MTC-RAIL that spread ceiling loading
  • Four pieces per carton
Model: MTC-81BB8 MSRP: $220.00
The MTC-81BB8 is designed for use in applications requiring preinstalled backcans and is compatible with ceiling speakers having a 286 mm (11.25 in) mounting circle diameter, such as the JBL 8138 ceiling loudspeaker, and the JBL MTC-81TB8 tile b...
Model: MTC-81TB8 MSRP: $108.00
The MTC-81TB8 tile bridge is designed for use in applications requiring pre-installed backcans in suspended ceiling applications and is compatible with ceiling speakers having a 286 mm (11.25 in) mounting circle diameter, such as the JBL 8138 ce...
Model: MTC-CBT-70T MSRP: $169.00
HARMAN's JBL Professional is introducing its MTC-CBT-70T bolt-on transformer module for its CBT 70J-1 Constant Beamwidth Technology line array column speaker and CBT 70JE-1 low-frequency extension module. The MTC-CBT-70T enables the use of these...
Model: MTC-CBT-FM1 MSRP: $136.00
This package of white MTC-CBT-FM1-WH CBT Flush-Mount Wall Brackets from JBL includes two low-profile, close-to-wall, mounting brackets to be used with the CBT 50LA-1 and CBT 100LA-1.
  • Device Supported: Speaker
  • Features: Weather Resistant
  • Product Material: Zinc Plated Steel
Model: MTC-CBT-FM1-WH MSRP: $110.00
Provides Low-Profile, Close-to-Wall Mounting Brackets for JBL CBT Line Array Column SpeakersDrop-In Ease of Assembly with Set Screw(s) for Secure InstallationROHS-Compliant Zinc Plating for Weather ResistanceFor Mounting Speaker in Typical Verti...
Model: MTC-CBT-FM2 MSRP: $200.00
This pack of white MTC-CBT-FM2-WH CBT Flush-Mount Wall Brackets from JBL includes two low-profile, close-to-wall, mounting brackets to be used with the CBT 70J-1 and CBT 70J-1/70JE-1 Array.
  • For Use with CBT 70J-1 and CBT 70J- 1/70JE-1 array.
  • Loudspeaker-Mount Section of bracket attaches to the included insert points on the back panel of the speaker (using the M6x15 mm bolts, flat washers & lock washers that come with the speaker). Mounting points are at 254 mm x 70 mm (10 x 2-3/4 inch) spacing
  • Wall-Mount Section has 3 aligned holes vertically; 3 aligned holes horizontally.
Model: MTC-CBT-FM2-WH MSRP: $196.00
Provides Low-Profile, Close-to-Wall Mounting Brackets for JBL CBT Line Array Column SpeakersDrop-In Ease of Assembly with Set Screw(s) for Secure InstallationROHS-Compliant Zinc Plating for Weather ResistanceFor Mounting Speaker in Typical Verti...
Model: MTC-CBT-SMB1 MSRP: $83.00
MTC-CBT-SMB1 is a stand-mount adapter for mounting JBL's CBT 50LA, CBT 100LA or CBT 70J line array column speakers onto a standard speaker stand having a 35 mm (1-3/8 inch) diameter mounting pole, such as JBL's SS2-BK or other brand.
  • For CBT 70J-1 loudspeaker
  • Use with 35 mm heavy duty speaker stand
Model: MTC-CBT-SUS3 MSRP: $109.00
Suspension Adapter Plates for ALL CBT Models Suspension Adapter Plates for ALL CBT Models. Bent-metal adapter plates that provide convenient clip points for suspending CBT speakers via aircraft cable and other methods. Includes 2 pcs, for top & ...
Model: MTC-CBT-SUS3-WH MSRP: $150.00
Suspension Adapter Plates for ALL CBT Models Suspension Adapter Plates for ALL CBT Models. Bent-metal adapter plates that provide convenient clip points for suspending CBT speakers via aircraft cable and other methods. Includes 2 pcs, for top &a...
Model: MTC-PC2 MSRP: $35.02
The JBL MTCPC2 Weatherproof Control Loudspeaker Panel Cover is designed to be used over the existing input cup of the Control Contractor and Control Series loudspeakers. This watertight gland-fitting entrance seals and protects against liquid se...
Model: MTC-PC3 MSRP: $59.00
The MTC-PC2 and MTC-PC3 are simple-to-use protective Panel Covers for the input terminal panel of many models of Control Contractor and Control Series loudspeakers. On MTC-PC2, the wire exits from the rear of the cover, and on MTC-PC3, the wire ...
Model: MTC-RAIL MSRP: $76.00
Tile rail for 8124 4" and 8128 8" in-ceiling loudspeakers. Four tile rails come in a package.
  • Tile rails make installation easy in traditional ceiling tile applications
Model: MTC-RG6/8 MSRP: $46.00
Rugged 19 gauge metal construction for enduring reliability.Sculpted design for an elegant appearance and perfect for any decor or architectural setting.Zinc underplating provides a rust and scratch resistant surface for years of maintenance fre...
Model: MTC-SBT300 MSRP: $129.16
The MTC-SBT300 is a 70V/100V transformer for Control SB2210 dual 10-inch compact subwoofer.
  • Suitable for Control SB2210 subwoofer
Model: MTC-SG6/8 MSRP: $73.00
Rugged 19 gauge metal construction for enduring reliability.Sculpted design for an elegant appearance and perfect for any decor or architectural setting.Zinc plating provides a rust and scratch resistant surface for years of maintenance free wea...
Model: MTC-TB6/8 MSRP: $288.00
Tile Bridge for Control 200 and Control 300 Series
  • Robust 18-gauge steel construction with an epoxy based powdercoat finish
  •  Over-The-Grid design reduces sound transmission to ceiling grid thereby minimizing rattle
  • 310 mm (12.2 inch) opening accommodating both Control 328C/CT and Control 227C/CT models
Model: MTC-TCD MSRP: $16.00
MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 55 mm (2.2 in, ordering one set = 24 dog-ears for 8 speakers)
  • Device Supported: Speaker
  • Weight (Approximate): 5 lb
  • Compatibility: <b>JBL Pro Control Ceiling Loudspeaker:</b><br><ul><li>12C/T</li><li>24C/CT</li><li>26C/CT</li><li>19C/CT</li></ul>
Model: MTC-THINC-EAR MSRP: $11.33

  • Device Supported: Speaker
  • Weight (Approximate): 0.19 lb
  • Compatibility: <p><b>JBL Professional Speakers:</b></p> <ul> <li>C24C/CT Micro &amp; MircroPlus</li> <li>C24C/CT</li> <li>C26C/CT</li> <li>C19CS/CST</li> </ul>
Model: MTU-1 MSRP: $300.00
U-bracket for AM5215 and AM7215 loudspeaker. Easy installation. 2-way loudspeaker system with 1 x 15" LF driver, high power 2-way loudspeaker with 1 x 15" LF driver.
  • For AM5215 and AM7215 loudspeaker
  • Easy installation
  • 2-way loudspeaker system with 1 x 15" LF driver
Model: MTU-1-WH MSRP: $300.00

  • Device Supported: Speaker
  • Product Color: White
  • Compatibility: <p><b>JBL Professional Loudspeaker:</b></p><ul><li>AM5215</li><li>AM7215<br><br></li></ul>
Model: MTU-15-WH MSRP: $110.00
The MTU-15-WH is U-bracket for AC15 2-way loudspeaker. Available in white.
  • U-bracket for AC15 2-way loudspeaker
  • Available in white
Model: MTU-16 MSRP: $146.00
The MTU-16 is U-bracket for AC16 loudspeaker. Easy to install.
  • For AC16 loudspeaker
  • Easy to install
Model: MTU-16-WH MSRP: $146.00
The white JBL MTU-16 Bracket for AC16 Speaker can be mounted to a wall or ceiling, and then angled to suit your needs.
  • Device Supported: Speaker
  • Product Color: White
  • Compatibility: <p>JBL Professional AC16 Loudspeaker</p>
Model: MTU-18 MSRP: $170.00
The MTU-18 is U-bracket for AC18 loudspeaker. Easy to install.
  • For AC18 loudspeaker
  • Easy to install
Model: MTU-18-WH MSRP: $164.80

  • Device Supported: Speaker
  • Product Color: White
  • Compatibility: <p><b>JBL Professional Loudspeaker:</b></p><ul><li>AC18/95</li><li>AC18/26<br><br></li></ul>
Model: MTU-195 MSRP: $199.00
The MTU-195 is U bracket for AC195 loudspeaker.
  • Device Supported: Loudspeaker
  • Product Color: Black
  • Weight (Approximate): 3 lb
Model: MTU-195-WH MSRP: $156.00
The MTU-195-WH is U bracket for AC195 loudspeaker. Available in white.
  • Device Supported: Loudspeaker
  • Product Color: White
  • Compatibility: JBL AC195 2-Way Full-Range Loudspeaker
Model: MTU-26 MSRP: $160.00
U-Bracket for AC26 Loudspeaker
  • Device Supported: Speaker
  • Product Color: Black
  • Product Color: White
Model: MTU-26-WH MSRP: $160.00
The white JBL MTU-26 Bracket for AC26 Speaker can be mounted to a wall or ceiling and then angled to suit your needs.
  • U-Bracket
Model: MTU-266-99 MSRP: $190.00
The MTU-266-99 is U bracket for AC266 and AC299 loudspeakers.
  • U bracket for AC266 and AC299 loudspeakers
Model: MTU-266-99-WH MSRP: $190.00
The MTU-266-99-WH is U bracket for AC266 and AC299 loudspeakers. Available in white.
  • U bracket for AC266 and AC299 loudspeakers
  • Available in white
Model: MTU-28 MSRP: $220.00
The JBL MTU-28 Bracket for AC28 Speaker can be mounted to a wall or ceiling, and then angled to suit your needs.
    Model: MTU-28-WH MSRP: $220.00
    The MTU-28-WH is U bracket for AC28 loudspeaker. Available in white.
    • U bracket for AC28 loudspeaker
    • Available in white
    Model: MTU-3 MSRP: $310.00
    The MTU-3 is a U-bracket. It is suitable for AM5212 and AM7212 2-way ultra compact loudspeaker. The AM5212/00 is medium power, lightweight, 2-way, full-range loudspeaker system. The AM7212/00 is a high power, lightweight, 2-way, full-range louds...
    Model: MTU-3-WH MSRP: $310.00

    • Device Supported: Speaker
    • Product Color: White
    • Compatibility: <p><b>JBL Professional Loudspeaker:</b></p><ul><li>AM6212</li><li>AM4212</li><li>AE Series</li></ul>
    Model: MTU-4 MSRP: $300.00
    The MTU-4 is a U-bracket. It is suitable for AC2212 2-way compact loudspeaker. AC2212/95 is compact 2-way full-range loudspeaker system comprised of one 300mm (12 in) low frequency driver and one 25mm (1 in) voice-coil compression driver.
    • Device Supported: Speaker
    • Compatibility: <p><b>JBL Loudspeaker:</b></p><ul><li>AC2215</li></ul>
    Model: MTU-566-99 MSRP: $210.00
    The MTU-566-99 is U bracket for AC566 and AC599 loudspeakers.
    • Device Supported: Loudspeaker
    • Product Color: Black
    • Compatibility: <p><b>JBL Professional Loudspeakers:</b></p> <ul> <li>AC566 </li> <li>AC599</li> </ul> <p></p>
    Model: MTU-895 MSRP: $140.00

    • Device Supported: Loudspeaker
    • Product Color: Black
    • Compatibility: <p>JBL AC895 Loudspeaker</p>
    Model: MTX3 MSRP: $1831.00
    Designed primarily for multi-zone commercial installations, MTX Series matrix processors are equipped with flexible processing functions essential to various applications such as retail stores, restaurants/bars, or banquet rooms. Responsible for...
    Model: MTX5-D MSRP: $3292.00
    Matrix processor offers expandability and format compatibility with an on-board Dante network port and MY card slot
    • Inputs; 8 mono (mic/line), 2 stereo (line), 16digital (via YDIF*) .
    • Outputs; 8 mono (line), 16 digital (via YDIF*) .
    • Can expand YDIF equipped inputs and outputs with Exi8/Exo8 expanders.