Buy High Performance, Wide Coverage Audio Products

Shure - Replacement kit for CVL lavalier microphone

Model: RK376 MSRP: $8.00

Replacement kit with 2 clips and 1 foam windscreen for CVL lavalier microphone.

Quick Quote View Details

Shure - Replacement Accessory Kit for SM35

Model: RK378 MSRP: $8.00

The RK378 is replacement kit with clip and 2 snap-fit foam windscreens for SM35 headset microphone.

Compatibility: Shure SM35 Performance Headset Condenser Microphone

Quick Quote View Details

Shure - Replacement Accessory Kit for SM31FH

Model: RK379 MSRP: $8.00

Kit offers replacement parts for SM31FH Fitness Headset Microphones, including clip and 2 windscreens.

Quick Quote View Details

Shure - Black Foam Windscreens for MX405 and MX410 Microphones Contains

Model: RK513WS MSRP: $22.00

Black foam windscreens for MX405 and MX410 microphones. Contains four.

Product Color: Black
Product Material: Foam

Quick Quote View Details

Shure - Hang-Up Brackets for Handheld Microphone contains

Model: RK6MB MSRP: $11.00

The RK6MB is a hang-up bracket for handheld microphones. (Contains three).

Device Supported: Microphone
Device Supported: Radio
Features: Heavy Duty

Quick Quote View Details

Atlas - 3 Amp Relay

Model: RLM-24 MSRP: $93.99

The RPM/RLM Series is a modular relay pak line which offers configuration flexibility in reference to number of relays, relay type, and built-in expansion. There are consists of two basic chassis models (RPM2, and -4) and two types of plug-in re...

Quick Quote View Details

EV Electronics - Single Rack Mount Kit for R300 Receiver

Model: RM-300 MSRP: $41.50

Quick Quote View Details

Yamaha - Adecia RM Ceiling Array Microphone - Black

Model: RM-CG-B MSRP: $4724.00

A ceiling array microphone equipped with unique audio signal processing technology that enables high-quality communication

Connectivity Technology: Wired
Microphone Technology: Dynamic
Microphone Type: Ceiling Mount

Quick Quote View Details

RDL - Rack Mount for 9 Decora Modules-3 RU

Model: RM-D9 MSRP: $125.44

Device Supported: Module
Application/Usage: Rack
Compatibility: RDL 3 Ru 9 Decora Modules

Quick Quote View Details

RDL - Decora Filler Panel for RM-D3 or RM-D9

Model: RM-DFP1 MSRP: $4.80

The RM-DFP1 is a filler panel for unused cutouts in Decora style rack chassis such as RM-D3 or the RM-D9. The RM-DFP1 is constructed of steel with a black powdercoat finish to match the appearance of the rack chassis.

Occupies One Product Mounting Location in RDL RM-D3 or RM-D9 Rack Adapters
Matches the Appearance of RDL Rack Chassis
All-Steel Construction

Quick Quote View Details

Yamaha - RM Wired Tabletop Microphone - White

Model: RM-TT-W MSRP: $655.00

Tabletop array microphone that provides a comfortable sound environment without any settings Featuring the new RM-TT wired tabletop microphone with built-in innovative DSP technology that provides a comfortable sound environment without any se...

Quick Quote View Details

Yamaha - 16-channel Wireless Access Point RM-WAP-16 for Remote Conferencing

Model: RM-WAP16 MSRP: $11812.00

A new 16 channel wireless access point (WAP) which doubles the previously available number of channels from a single unit. Before this, two eight channel RM-WAP-8 units were required for nine or more channels of Yamaha's RM-W wireless microphon...

Quick Quote View Details

Yamaha - RM Wireless Microphone lithium ion replacement battery

Model: RM-WBT MSRP: $73.00

The Yamaha RM-WBT is a rechargeable lithium-ion battery for use with the ADECIA RM series of wireless conferencing microphones. The battery is available as a replacement if the original is worn out or lost or as a backup battery to ensure you do...

Quick Quote View Details

Roland - 10FT MICROPHONE CABLE

Model: RMC-B10

Roland’s Black Series microphone cables deliver professional performance and exceptional value. Our multi-strand, oxygen-free copper core wire translates the true tones of voices and instruments, while high-density spiral shielding eliminates un...

Quick Quote View Details

Roland - 3FT MICROPHONE CABLE

Model: RMC-B3

Roland’s Black Series microphone cables deliver professional performance and exceptional value. Our multi-strand, oxygen-free copper core wire translates the true tones of voices and instruments, while high-density spiral shielding eliminates un...

Quick Quote View Details

Roland - 5FT MICROPHONE CABLE

Model: RMC-B5

Balanced mic cable-heavy-duty XLR connectors, 3 ft./1 m length. Also available in 5 ft./1.5 m (RMC-B5), 10 ft./3 m (RMC-B10), 15 ft./4.5 m (RMC-B15), 20 ft./6 m (RMC-B20), 25 ft./7.5 m (RMC-B25), and 50 ft./15 m (RMC-B50) lengths.Roland's B...

Quick Quote View Details

Roland - ROLAND 50 FT /15.25 M MIC CABLE

Model: RMC-B50

Balanced mic cable-heavy-duty XLR connectors, 3 ft./1 m length. Also available in 5 ft./1.5 m (RMC-B5), 10 ft./3 m (RMC-B10), 15 ft./4.5 m (RMC-B15), 20 ft./6 m (RMC-B20), 25 ft./7.5 m (RMC-B25), and 50 ft./15 m (RMC-B50) lengths.Roland's B...

Quick Quote View Details

Roland - Roland 50ft Mic cable

Model: RMC-G50 MSRP: $99.00

Balanced mic cable-Neutrik XLR connectors, 3 ft./1 m length. Also available in 5 ft./1.5 m (RMC-G5), 10 ft./3 m (RMC-G10), 15 ft./4.5 m (RMC-G15), 25 ft./7.5 m (RMC-G25), and 50 ft./15 m (RMC-G50) lengths.Roland's Gold Series microphone cab...

Quick Quote View Details

Shure - Remote Mic Universal Cable for SE Earphones

Model: RMCE-UNI MSRP: $41.00

Universal 3.5mm communication cable with microphone and controls for Shure Sound Isolatingtrade; Earphones featuring selectable operation for both Apple and Android devices with a 3.5mm connection. The inline microphone and remote ensures clarit...

Quick Quote View Details

EV Electronics - Dual Rack Mount Kit for R300 Receiver

Model: RMD-300 MSRP: $59.00

Quick Quote View Details

Roland - 10FT / 3M DUAL MIDI CABLE

Model: RMIDI-B10-DUAL MSRP: $31.99

Quick Quote View Details

Audix - Rackmount for two R41 or R61 receivers

Model: RMT241 MSRP: $49.00

Metal rackmount accessory that adapts two R41 or R61 receivers into a single rack space. When using this rackmount, the antennas must remain on the rear side of the receivers.

Device Supported: Wireless Microphone Receiver
Device Supported: Microphone
Product Material: Metal

Quick Quote View Details

Audix - RACK MOUNT BRACKET, SINGLE, FOR R41,R61

Model: RMT4161 MSRP: $39.00

The RMT4161 adapts one R41 or R61 receiver into a single 19 inch rack space and features mounting holes for front mounting antennas (RMT41 KIT required).

Device Supported: Receiver
Device Supported: Antenna
Device Supported: Microphone

Quick Quote View Details

Audix - RACK MOUNT KIT, SINGLE, R41,R61 W/BNC

Model: RMT41KIT MSRP: $69.00

The Audix RMT41KIT is designed to mount one Audix R41 or R62 receiver into a single 19 inch rack space. It includes the RMT4161 rackmount kit and all the parts needed to front mount the antennas.

Application/Usage: Receiver

Quick Quote View Details

Audix - Rackmount for dual channel R42 and R62 receivers

Model: RMT42 MSRP: $39.00

Metal rackmount that adapts one R42 or R62 two-channel receiver into a single 19-inch rack space.

Device Supported: Microphone
Device Supported: Receiver
Product Material: Metal

Quick Quote View Details

Audix - RACK MOUNT KIT, FOR R42, R62 W/BNC

Model: RMT42KIT MSRP: $69.00

The RMT42 KIT includes the RMT42 rackmount and the BNC cables needed for front mounting the antennas.

Application/Usage: Receiver

Quick Quote View Details

Hamilton BUHL - Remote Teaching Kit Kit Contains one ea WMS2G WEBCAM

Model: RMTK MSRP: $99.99

Maximize remote student engagement with HamiltonBuhl's Remote Teaching Kit! With Plug-and-Play simplicity (pairs in 2 seconds), this system frees your hands for livestreaming lessons during remote or hybrid class sessions, interviewing, recordin...

Quick Quote View Details

Atlas - 6" 2-WAY COAXIAL SPEAKER WITH 70.7V-32W TRANS

Model: ROCKFA62T-BR MSRP: $281.99

AtlasIED’s ROCKFA62T-BR brings Strategy Series® sound quality to the great outdoors by packaging the proven performance of the Strategy Series® FA136 driver in a specially designed, natural looking brown enclosure designed to mimic the look of ...

Quick Quote View Details

RANE - Remote Power Injector for High-Power RADs and DRs for use with HAL3S

Model: RPIXUS

The RPI is a remote powering device for the DR6 Touchscreen Digital Remote and the RAD26 One-Room Remote Audio Device. This power supply is needed when using the DR6 or RAD26 with rackmount HAL units (HAL3s and legacy units). The RPI is connecte...

Quick Quote View Details

Williams Sound - Rack panel kit. For two transmitters or modulators in one IEC rack

Model: RPK 006 MSRP: $100.00

Quick Quote View Details

EV Electronics - Rough in package for new construction

Model: RPK-42-B MSRP: $200.00

Quick Quote View Details

EV Electronics - Rough in package for new construction

Model: RPK-810-B MSRP: $200.00

Quick Quote View Details

EV Electronics - Rough in package for new construction

Model: RPK-82-B MSRP: $200.00

Quick Quote View Details

Atlas - 2 Socket Modular Relay Pack

Model: RPM-2 MSRP: $254.99

Atlas Model RPM-2 provides a convenient and economical way to wire 24V relays into speaker switching circuits, zone paging applications, etc. All relay contacts are clearly silk screened on each PC board for easy circuit wiring, and are terminat...

Quick Quote View Details

Shure - Multi Position Tie Clip for MX150, Black

Model: RPM150TC

Shure RPM150TC is a Multi-position tie clip that secures microphones to clothing.

Quick Quote View Details

Shure - Grille for NXN2, Black

Model: RPM284 MSRP: $33.00

The Nexadyne 2 supercardioid kick drum microphone is compatible with the Shure RPM284, a replacement grille. The microphone achieves clearer transients by reducing wind noise and protecting the Revonic dual-engine microphone element with a dent-...

Quick Quote View Details

Shure - Grille for NXN5, Black

Model: RPM285 MSRP: $29.00

The Nexadyne 5 supercardioid kick drum microphone is compatible with the Shure RPM285, a replacement grille. The microphone achieves clearer transients by reducing wind noise and protecting the Revonic dual-engine microphone element with a dent-...

Quick Quote View Details

Shure - Grille for NXN6, Black

Model: RPM286 MSRP: $29.00

The Nexadyne 6 supercardioid kick drum microphone is compatible with the Shure RPM286, a replacement grille. The microphone achieves clearer transients by reducing wind noise and protecting the Revonic dual-engine microphone element with a dent-...

Quick Quote View Details

Shure - SHURE 2FT MXA710 Wall Mount

Model: RPM710-2M

Allows the MXA710 Linear Array to be mounted flush within a table, wall or hard ceiling surface for an improved appearance while maintaining acoustic performance. Securely houses the array and provides knock outs for convenient cable routing as ...

Quick Quote View Details

Shure - Microphone Preamp For Use With VP89 Shotgun

Model: RPM89/PRE MSRP: $433.00

Replacement XLR preamplifier for VP89S, VP89M, and VP89L End-Address shotgun condenser microphones.

Quick Quote View Details

Shure - SHURE PGA48 Grill

Model: RPMP48G MSRP: $17.00

Product Color: Silver
Product Material: Steel

Quick Quote View Details

Shure - Uniplex Windscreen, Blk

Model: RPMUL4SFWS/B MSRP: $20.00

The AUL4B snap-fit windscreen is designed for use with the Shure UniPlex series of lapel microphones (sold separately). The windscreen reduces the effect of plosives (hard consonants) along with breath and wind noise ensuring a clear, articulate...

Quick Quote View Details

Shure - Uniplex Windscreen, Cocoa

Model: RPMUL4SFWS/C MSRP: $20.00

The AUL4B snap-fit windscreen is designed for use with the Shure UniPlex series of lapel microphones (sold separately). The windscreen reduces the effect of plosives (hard consonants) along with breath and wind noise ensuring a clear, articulate...

Quick Quote View Details

Shure - Uniplex Windscreen, Tan

Model: RPMUL4SFWS/T MSRP: $20.00

The AUL4B snap-fit windscreen is designed for use with the Shure UniPlex series of lapel microphones (sold separately). The windscreen reduces the effect of plosives (hard consonants) along with breath and wind noise ensuring a clear, articulate...

Quick Quote View Details

Shure - Uniplex Windscreen, Wht

Model: RPMUL4SFWS/W MSRP: $20.00

The AUL4B snap-fit windscreen is designed for use with the Shure UniPlex series of lapel microphones (sold separately). The windscreen reduces the effect of plosives (hard consonants) along with breath and wind noise ensuring a clear, articulate...

Quick Quote View Details

Shure - Wireless SM58 Cartridge; Housing Assembly and Matte

Model: RPW112 MSRP: $184.00

RPW112 Wireless cartridge with housing assembly and matte grille for use with wireless SM58 vocal microphone.

Quick Quote View Details

Shure - Wireless Beta58A Cartridge Housing Assembly and Matte Grille

Model: RPW118 MSRP: $222.00

RPW118 Wireless cartridge with housing assembly and matte grille for use with wireless Beta 58A vocal microphone.

Environmentally Friendly: Yes
Environmental Certification: California Proposition 65

Quick Quote View Details

Shure - Wireless Beta87C Cartridge;Hou sing Assembly

Model: RPW122 MSRP: $458.00

RPW122 Wireless cartridge with housing assembly and matte grille for use with wireless Beta 87C vocal microphone.

Quick Quote View Details

Shure - VP68 Omnidirectional Wireless Capsule

Model: RPW124 MSRP: $344.00

RPW124 is a omnidirectional wireless capsule for ENG and interview field recording.

Requires minimal positioning towards sound source
Sound source is typically interview subjects
Excellent clarity for on-axis or off-axis sources

Quick Quote View Details

Shure - Black KSM8 Wireless capsule for Shure Transmitters

Model: RPW174 MSRP: $870.00

The black RPW174 from Shure is a dual-diaphragm dynamic microphone capsule compatible with all interchangeable Shure handheld wireless transmitters - sold separately - and crafted for vocal reproduction in sound-reinforcement applications such a...

Quick Quote View Details

Shure - Wireless KSM9 BK Black Cartridge Housing Assembly and Matte

Model: RPW184 MSRP: $1054.00

RPW184 is a cartridge with matte grille. It is suitable for KSM9 microphone.

Product Color: Black
Environmentally Friendly: Yes
Environmental Certification: California Proposition 65

Quick Quote View Details

Shure - Replacement Wireless Head for KSM9; Nickel

Model: RPW188 MSRP: $961.00

The RPW188 is a KSM9 Dual-pattern condenser wireless microphone capsule.

Product Color: Nickel

Quick Quote View Details

Shure - Replacement Wireless Head for KSM9HS; Nickel

Model: RPW190 MSRP: $961.00

The RPW190 is a KSM9HS Multi-pattern dual diaphragm condenser wireless microphone capsule.

Product Color: Nickel

Quick Quote View Details

Shure - Shure RPW192 KSM11 Capsule for ADX2 - Black

Model: RPW192 MSRP: $1124.00

The black Shure KSM11 is a cardioid condenser microphone capsule for Shure handheld wireless microphones equipped with an interchangeable cartridge design. The KSM11 cartridge features a cardioid polar pattern with consistent off-axis rejection ...

Quick Quote View Details

Shure - single rack mount kit

Model: RPW503

Shure RPW503 allows you to easily rackmount one P9T or P3T wireless transmitter in a single rack space. This kit also works with a single Shure BLX4R, SLX4, or ULXD4 receiver and the PA411 antenna combiner.

Rackmounts One Unit in Single Rack Space
Fits BLX4R and SLX4 Receivers
Fits PA411 Antenna Combiner

Quick Quote View Details

Shure - SHURE Dual Rack Mount Kit

Model: RPW504

Rackmounting two P9T or P3T wireless transmitters in one rack space is simple with the Shure RPW504. The PA411 antenna combiner and two Shure BLX4R and SLX4 receivers are also compatible with this setup. Additionally, it has room for one ULXD4 r...

Quick Quote View Details

EV Electronics - Rough-in mounting plate for new construction

Model: RR-42-B MSRP: $174.00

Quick Quote View Details

EV Electronics - Rough-in mounting plate for new construction

Model: RR-810-B MSRP: $174.00

Quick Quote View Details

EV Electronics - Rough-in mounting plate for new construction

Model: RR-82-B MSRP: $174.00

Quick Quote View Details

EV Electronics - Rough-in mounting plate for new construction

Model: RR-PC62-B MSRP: $174.00

Quick Quote View Details

EV Electronics - Rough-in mounting plate for new construction

Model: RR-PC82-B MSRP: $174.00

Quick Quote View Details

Atlas - Extra Rack Rails for 300 Series-10 RU

Model: RR310 MSRP: $92.99

Mounting Rail is 11-gauge Crs tapped 10-32 on EIA spacing and painted black

Finished in black
Rails are Sold in Pairs and Include Hardware
These 11-Gauge CRS Mounting Rails are Tapped 10-32 on E.I.A. Universal Spacing

Quick Quote View Details

Atlas - Mounting Rail is 11-gauge Crs tapped 10-32 on EIA spacing

Model: RR324 MSRP: $144.99

Mounting Rail is 11-gauge Crs tapped 10-32 on EIA spacing and painted black.

Finished in black
Rails are Sold in Pairs and Include Hardware
These 11-Gauge CRS Mounting Rails are Tapped 10-32 on E.I.A. Universal Spacing

Quick Quote View Details

Williams Sound - RM-1U Rack mount tray

Model: RRM01U MSRP: $115.00

RM-1U Rack mount tray.

Quick Quote View Details

Toa - Single call button switch plate

Model: RS-143 MSRP: $95.00

The RS-143 is a switch panel designed for use with the N-8000RS or N-8010RS 2-Core Shielded Substation Interface Unit. It is equipped with a Call button and can be installed in a 1-gang electrical box. By connecting a high impedance speaker to i...

Quick Quote View Details

Toa - 2-Button Switch plate, dual master or dual priority assignable

Model: RS-144 MSRP: $114.00

The RS-144 dual button call panel substation is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides Emergency (Red) and Normal (white) buttons that can be individually programmed to report to any master station b...

Quick Quote View Details

Toa - Handset for N-8031MS and N-8033MS- 4 wire Master Station

Model: RS-191 MSRP: $103.00

The RS-191 Handset is designed exclusively for use indoors in combination with the RS-190Substation. Lifting the handset permits handset conversation. Handset conversation can be established in conjunction with the optional Flush-mount Hands-fre...

Quick Quote View Details

EV Electronics - Referee switch box for beltpack transmitters with a TA4 mic connector

Model: RSB-2 MSRP: $572.00

Quick Quote View Details

RDL - Line-Level Bi-Directional Network Interface-2 Balanced Line Inputs, Dante Input-2 Balanced Line Outputs, Dante Output

Model: RU-LB2 MSRP: $805.65

Quick Quote View Details

RDL - Line-Level Bi-Directional Network Interface-2 Balanced Line Inputs, Dante Input-2 Balanced Line Outputs, Dante Output-with PoE

Model: RU-LB2P MSRP: $900.47

Quick Quote View Details

RDL - Line-Level Bi-Directional Network Interface-4 Balanced Line Inputs, Dante Input-4 Balanced Line Outputs, Dante Output

Model: RU-LB4 MSRP: $979.42

The RU-LB4 modules are Dante audio network interface products compatible with line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in ...commercial/industrial installations.APPLICATION: The RU-LB4 is a high quality converter that provides professional line-level outputs from four Dante network received audio channels. It also converts four professional or consumer line-level sources to Dante network audio channels. Network to Line Level Interface Section The RU-LB4 converts four Dante audio channels to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level.One front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module's location. Line Level to Network Interface Section The RU-LB4 converts four line-level audio sources to Dante networked digital audio channels. Each input is equipped with a front-panel gain trimmer and associated Dual-LED VU meter to facilitate optimal input gain adjustment. Each input supports the complete range of normal unbalanced -10 dBV and balanced +4 dBu line-level sources. Input gain adjusted according to the Dual-LED VU meter assures an operating level that preserves full headroom with the lowest noise floor.The RU-LB4 is powered from an external 24 Vdc power supply, available separately. The RU-LB4P is equipped to operate from a PoE enabled network switch. The RU-LB4P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-LB4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.The RU-LB4's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems.The RU-LB4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.

Product Features:

Converts Standard Line-Level Audio Sources to Dante Network Channels
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced+4 dBu Signals with >18 dB Headroom
Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input

Quick Quote View Details

RDL - Line-Level Bi-Directional Network Interface-4 Balanced Line Inputs, Dante Input-4 Balanced Line Outputs, Dante Output-with PoE

Model: RU-LB4P MSRP: $1074.25

The RU-LB4 modules are Dante audio network interface products compatible with line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in ...commercial/industrial installations. APPLICATION: The RU-LB4 is a high quality converter that provides professional line-level outputs from four Dante network received audio channels. It also converts four professional or consumer line-level sources to Dante network audio channels. Network to Line Level Interface Section The RU-LB4 converts four Dante audio channels to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level. One front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module's location. Line Level to Network Interface Section The RU-LB4 converts four line-level audio sources to Dante networked digital audio channels. Each input is equipped with a front-panel gain trimmer and associated Dual-LED VU meter to facilitate optimal input gain adjustment. Each input supports the complete range of normal unbalanced -10 dBV and balanced +4 dBu line-level sources. Input gain adjusted according to the Dual-LED VU meter assures an operating level that preserves full headroom with the lowest noise floor. The RU-LB4 is powered from an external 24 Vdc power supply, available separately. The RU-LB4P is equipped to operate from a PoE enabled network switch. The RU-LB4P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-LB4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. The RU-LB4's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. The RU-LB4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.

Product Features:

Converts Standard Line-Level Audio Sources to Dante Network Channels
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced+4 dBu Signals with >18 dB Headroom
Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input

Quick Quote View Details

RDL - Dual Mic / Line Preamplifier

Model: RU-MLA2 MSRP: $498.04

The RU-MLA2 is a dual channel audio preamplifier. The inputs and outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. Each input accepts either a balanced microphone or line level signal. Ea...

Quick Quote View Details

RDL - Dual Channel Microphone; Line Preamplifier

Model: RU-MLA2T MSRP: $782.53

The RU-MLA2 is a dual channel audio preamplifier. The inputs and outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. Each input accepts either a balanced microphone or line level signal. Ea...

Quick Quote View Details

RDL - Mic/Line Bi-Directional Network Interface-2 Switchable Mic or Line Inputs, Dante Input-2 Balanced Line Outputs, Dante Output

Model: RU-MLB2 MSRP: $905.49

The RU-MLB2 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves ...or backboards in commercial/industrial installations. APPLICATION: The RU-MLB2 is a high quality converter that provides professional line-level outputs from two Dante network received audio channels. It also converts two professional or consumer line-level sources, or dynamic or condenser microphones to Dante network audio channels. Network to Line Level Interface Section The RU-MLB2 converts two Dante audio channels to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level. One front-panel green signal LED corresponds to each of the two Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module's location. Mic or Line Level to Network Interface Section The RU-MLB2 converts two audio sources to Dante networked digital audio channels. Each input is equipped with a rear-panel input selector the installer sets to mic or line. In the mic position, the balanced input provides P48 phantom to an associated microphone jack. Connection of a dynamic microphone sets the preamplifier gain to 60 dB. Connection of a condenser microphone sets the gain to 40 dB. The automatic gain setting is always active so that no user adjustment is required when changing microphones. In the line position, the balanced input accepts a standard +4 dBu source, and the unbalanced line input terminals accept a -10 dBV source for normal operating level. Separate wiring terminals are provided for balanced and unbalances sources. A front-panel variable-intensity LED indicator is provided for each of the two inputs to facilitate setup. The RU-MLB2 is powered from an external 24 Vdc power supply, available separately. The RU-MLB2P is equipped to operate from a PoE enabled network switch. The RU-MLB2P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-MLB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. The RU-MLB2's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. The RU-MLB2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.

Product Features:

Interfaces Two Dante Inputs and Two Dante Outputs
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Each Input is Switch-Selectable for Mic or Line

Quick Quote View Details

RDL - RDL Mic/Line Bi-Directional Network Interface POE 2 Dante in/2 Dante out

Model: RU-MLB2P MSRP: $1000.32

The RU-MLB2 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables, and on shelves... or backboards in commercial/industrial installations. APPLICATION: The RU-MLB2 is a high-quality converter that provides professional line-level outputs from two Dante network-received audio channels. It also converts two professional or consumer line-level sources, or dynamic or condenser microphones to Dante network audio channels. The RU-MLB2 converts two Dante audio channels to a balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below the operating level. One front-panel green signal LED corresponds to each of the two Dante input channels. The received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location. The RU-MLB2 converts two audio sources to Dante networked digital audio channels. Each input is equipped with a rear-panel input selector the installer sets to mic or line. In the mic position, the balanced input provides the P48 phantom to an associated microphone jack. The connection of a dynamic microphone sets the preamplifier gain to 60 dB. The connection of a condenser microphone sets the gain to 40 dB. The automatic gain setting is always active so that no user adjustment is required when changing microphones. In the line position, the balanced input accepts a standard +4 dBu source, and the unbalanced line input terminals accept a -10 dBV source for the normal operating level. Separate wiring terminals are provided for balanced and unbalanced sources. A front-panel variable-intensity LED indicator is provided for each of the two inputs to facilitate setup. The RU-MLB2 is powered by an external 24 Vdc power supply, available separately. The RU-MLB2P is equipped to operate from a PoE-enabled network switch. The RU-MLB2P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-MLB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. The RU-MLB2’s superior performance specifications make it ideally suited to the most demanding installations and an exceptional value in commercial networked audio systems. The RU-MLB2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted, or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.

Product Features:

Interfaces Two Dante Inputs and Two Dante Outputs
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Each Input is Switch-Selectable for Mic or Line

Quick Quote View Details

RDL - Mic/Line Bi-Directional Network Interface-4 Switchable Mic or Line Inputs, Dante Input-4 Balanced Line Outputs, Dante Output

Model: RU-MLB4 MSRP: $1124.17

Quick Quote View Details

RDL - RDL RU-MLB4P Mic/Line-Level Bi-Directional Network Interface, 4 line PoE

Model: RU-MLB4P MSRP: $1218.99

The RU-MLB4 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables, and on shelves... or backboards in commercial/industrial installations. APPLICATION: The RU-MLB4 is a high-quality converter that provides professional line-level outputs from four Dante network received audio channels. It also converts four professional or consumer line-level sources, or dynamic or condenser microphones to Dante network audio channels. The RU-MLB4 converts four Dante audio channels to a balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below the operating level. One front-panel green signal LED corresponds to each of the four Dante input channels. The received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected to the module’s location. The RU-MLB4 converts four audio sources to Dante networked digital audio channels. Each input is equipped with a rear-panel input selector the installer sets to mic or line. In the mic position, the balanced input provides a P48 phantom to an associated microphone jack. The connection of a dynamic microphone sets the preamplifier gain to 60 dB. The connection of a condenser microphone sets the gain to 40 dB. The automatic gain setting is always active so that no user adjustment is required when changing microphones. In the line position, the balanced input accepts a standard +4 dBu source, and the unbalanced line input terminals accept a -10 dBV source for normal operating level. Separate wiring terminals are provided for balanced and unbalanced sources. A front-panel variable-intensity LED indicator is provided for each of the four inputs to facilitate setup. The RU-MLB4 is powered from an external 24 Vdc power supply, available separately. The RU-MLB4P is equipped to operate from a PoE-enabled network switch. The RU-MLB4P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-MLB4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. The RU-MLB4’s superior performance specifications make it ideally suited to the most demanding installations and an exceptional value in commercial networked audio systems. The RU-MLB4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted, or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.

Product Features:

Interfaces Four Dante Inputs and Four Dante Outputs
Converts Four Standard Mic or Line Audio Sources to Dante Network Channels
Each Input is Switch-Selectable for Mic or Line

Quick Quote View Details

RDL - 1x4 Audio Distribution Amplifier

Model: RU-MLD4 MSRP: $499.52

The RU-MLD4 is a four channel audio distribution amplifier. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. The input accepts either a balanced microphone or line...

Quick Quote View Details

RDL - Mic / Line Distribution Amplifier

Model: RU-MLD4T MSRP: $784.08

The RU-MLD4 is a four channel audio distribution amplifier. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. The input accepts either a balanced microphone or line...

Quick Quote View Details

RDL - Pro 4 Input Mic/Line Mixer W/Phantom-Mic and Line Out

Model: RU-MX4 MSRP: $614.46

The RU-MX4 is the ideal choice in many applications where a combination of balanced mic and/or unbalanced line-level signals needs to be mixed. Balanced connections use XLR connectors. Unbalanced signals are coupled through phono jacks. Each of ...

Quick Quote View Details

RDL - Pro 4 Input Line Mixer-Mic and Line Out

Model: RU-MX4L MSRP: $528.67

The RU-MX4L is the ideal choice in many applications where a combination of balanced and/or unbalanced line-level signals needs to be mixed. Balanced connections use XLR connectors. Unbalanced signals are coupled through phono jacks. Each of the...

Quick Quote View Details

RDL - Pro 4 Input Line Mixer-Mic and Line Out

Model: RU-MX4LT MSRP: $582.00

The RU-MX4L is the ideal choice in many applications where a combination of balanced and/or unbalanced line-level signals needs to be mixed. Balanced connections use XLR connectors. Unbalanced signals are coupled through phono jacks. Each of the...

Quick Quote View Details

RDL - 4 Channel Microphone/Line Mixer w/ Phantom Power

Model: RU-MX4T MSRP: $646.73

Quick Quote View Details

RDL - RDL 5 input Mixer Part

Model: RU-MX5ML MSRP: $514.05

The RU-MX5ML is the ideal choice in many applications where a combination of balanced mic and/or balanced or unbalanced line-level signals needs to be mixed with the ability for additional expansion. All connections are made using detachable ter...

Quick Quote View Details

RDL - Network to Format A Interface/Distributor-Dante Input-3 Format A, 1 Balanced Line Aux Outputs

Model: RU-NFD MSRP: $939.52

Quick Quote View Details

RDL - Network to Format A Interface/Distributor-Dante Input-3 Format A, 1 Balanced Line Aux Outputs-with PoE

Model: RU-NFDP MSRP: $1034.35

The RU-NFD modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/...industrial installations.APPLICATION: The RU-NFD is an RDL Format-A sender/distributor that connects to a Dante-enabled network. It converts three Dante audio channels to RDL Format-A. Each network channel corresponds to Pair A, B or C of the Format-A outputs. The unit converts a fourth Dante audio channel to a balanced line-level AUX output.One front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module's location.The Format-A output is distributed to three separate rear-panel RJ45 jacks. Each Format-A output jack provides up to 200 mA of power to connected Format-A receivers. Multiple receivers may be daisy chained from one output jack, or may be connected by home run to each of the three outputs. Higher current Format-A receivers, such as RDL D-PSP1A powered Decora-style speakers, are to be individually connected to a separate output jack.The RU-NFD output jacks support the entire range of Format-A receivers, making each output pair available for end-user connection on various wall plates, or feeding other equipment using rack-mounted, shelf-mounted or utility Format-A receivers. The wide array of Format-A receivers provide compatibility with commercial audio equipment operating at standard professional levels. High resolution digital audio converters coupled with RDL's renowned analog filters provide superior fidelity with a very low noise floor. Each Format-A receiver may be connected near the RU-NFD or up to several thousand feet distant.The RU-NFD is powered from an external 24 Vdc power supply, available separately. The external supply powers the RU-NFD and Format-A receivers connected to all three Format-A outputs. The RU-NFDP is equipped for PoE which powers the RU-NFD and Format-A receivers connected to the primary Format-A output jack. Audio is also distributed to the other two output jacks. Remote Format-A receivers connected to those other two output jacks are only powered from the RU-NFDP if an external 24 Vdc power supply is connected. If PoE power and an external 24 Vdc supply are both feeding an RU-NFDP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external 24 V supply. The power feeding each Format-A RJ45 connector is separately protected by an automatically resetting fuse. A power LED is associated with each connector, facilitating identification of wiring faults.PoE relies on the use of a PoE enabled network switch. The RU-NFDP will reserve power from the switch even while being powered from an external 24 Vdc supply.The RU-NFD is constructed in a d

Product Features:

Converts Four Dante Network Audio Signals to RDL Format-A and Aux
Easy Installation with Format-A Connections on RJ45 through CATx Cable
Three Dante Audio Signals Feed Format-A Output Pairs A, B and C

Quick Quote View Details

RDL - Network to Line Level Interface-Dante Input-2 Balanced Line Outputs

Model: RU-NL2 MSRP: $719.87

Quick Quote View Details

RDL - Network to Line Level Interface-Dante Input-2 Balanced Line Outputs-with PoE

Model: RU-NL2P MSRP: $814.70

The RU-NL2 modules are Dante audio network interface products compatible with line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/i...

Quick Quote View Details

RDL - Network to Line Level Interface-Dante Input-4 Balanced Line Outputs

Model: RU-NL4 MSRP: $850.78

The RU-NL4 modules are Dante audio network interface products compatible with line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/i...

Quick Quote View Details

RDL - Network Mixing Processor- 4X4

Model: RU-NMP44 MSRP: $868.82

The RU-NMP44 is a network mixing processor containing six virtual audio mixers controlled by network commands from RDL and other network remote controls. Each mixer operates independently with input signal attenuation from unity to off. The outp...

Quick Quote View Details

RDL - 40 W Stereo Audio Power Amp with VCA & Power Supply-Includes North American Power Cord

Model: RU-PA40D MSRP: $478.55

Quick Quote View Details

RDL - 40 W Stereo Audio Power Amp with VCA & Power Supply-Export Model-Excludes Power Cord

Model: RU-PA40DE MSRP: $475.59

Quick Quote View Details

RDL - Power Amplifier 5 W Stereo / 18 W Mono

Model: RU-PA518 MSRP: $440.64

Quick Quote View Details

RDL - RS-232/422 Serial Converter (Full-Duplex)

Model: RU-SC2 MSRP: $359.69

Quick Quote View Details

RDL - Stereo Headphone Amplifier

Model: RU-SH1 MSRP: $295.72

Quick Quote View Details

RDL - 2 Channel Audio Meter-Average/Peak/Hold

Model: RU-SM16A MSRP: $473.20

Quick Quote View Details

RDL - 4 Channel Audio Meter-Average/Peak/Hold

Model: RU-SM16D MSRP: $851.75

Quick Quote View Details

RDL - RACK-UP Mounting Plate-mounts any RACK-UP module in a cabinet or other flat surface

Model: RU-SMA1 MSRP: $19.82

The RU-SMA1 is a plate for mounting a RACK-UP® module to any flat surface. The opening permits the mounting of either a RACK-UP module or RDL AMS accessories. The RU-SMA1 is ideal for mounting a module in a cabinet or lectern.

Device Supported: Modular Device
Height: 2.25"
Width: 6.56"

Quick Quote View Details

RDL - Sequencing Controller

Model: RU-SQ6A MSRP: $501.96

Quick Quote View Details

Category

Brand

Digital Inverter Compressor

Type

Frequency Range

Bridge Element

Price

Receiver Type

Microphone Type

Polar Pattern

Number of Battery & Surge Outlets

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Sitemaps

Downloads