Radio Design Labs Products distributed by Exertis Almo

RDL - Dual XLR 3-pin Female Jacks on D Plate-Terminal block connections-Black

Model: DB-XLR2F MSRP: $34.79

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - Dual XLR 3-pin Female Jacks on D Plate-Terminal block connections-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-XLR2FC MSRP: $46.92

Quick Quote View Details

RDL - Dual XLR 3-pin Male Jacks on D Plate-Terminal block connections-Black

Model: DB-XLR2M MSRP: $32.91

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - Dual XLR 3-pin Male Jacks on D Plate-Terminal block connections-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-XLR2MC MSRP: $45.04

Quick Quote View Details

RDL - XLR 3-pin Female Jack on D Plate-Terminal block connections-Black

Model: DB-XLR3F MSRP: $29.28

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Female Jack on D Plate-Terminal block connections-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-XLR3FC MSRP: $41.41

Quick Quote View Details

RDL - XLR 3-pin Male Jack on D Plate-Terminal block connections-Black

Model: DB-XLR3M MSRP: $29.28

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Male Jack on D Plate-Terminal block connections-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DB-XLR3MC MSRP: $41.41

Quick Quote View Details

RDL - Single Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-black

Model: DC-1B MSRP: $97.70

The DC-1B desktop chassis holds one Decora®-style product, which includes RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a vertic...

Quick Quote View Details

RDL - Single Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-gray

Model: DC-1G MSRP: $97.70

Quick Quote View Details

RDL - Single Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-white

Model: DC-1W MSRP: $97.70

The DC-1W desktop chassis holds one Decora®-style product, which includes RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a vertic...

Quick Quote View Details

RDL - Double Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-black

Model: DC-2B MSRP: $122.80

The DC-2B desktop chassis holds one or two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ver...

Quick Quote View Details

RDL - Double Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-gray

Model: DC-2G MSRP: $122.80

Quick Quote View Details

RDL - Double Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-white

Model: DC-2W MSRP: $122.80

The DC-2W desktop chassis holds one or two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ver...

Quick Quote View Details

RDL - Triple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-black

Model: DC-3B MSRP: $147.36

The DC-3B desktop chassis holds one, two or three Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or o...

Quick Quote View Details

RDL - Triple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-gray

Model: DC-3G MSRP: $147.36

Quick Quote View Details

RDL - Triple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-white

Model: DC-3W MSRP: $147.36

Quick Quote View Details

RDL - Quadruple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-black

Model: DC-4B MSRP: $172.30

The DC-4B desktop chassis holds one, two, three or four Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tableto...

Quick Quote View Details

RDL - Quadruple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-gray

Model: DC-4G MSRP: $172.30

Quick Quote View Details

RDL - Quadruple Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels-white

Model: DC-4W MSRP: $172.30

The DC-4W desktop chassis holds one, two, three or four Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tableto...

Quick Quote View Details

RDL - Desktop Chassis Foot Kit for DC Series Desktop Chassis

Model: DC-F MSRP: $31.34

The DC-F is an adapter kit that adds feet to an RDL DC-1, DC-2, DC-3 or DC-4 Desktop Chassis for free-standing use. The kit contains two adapter plates with rubber feet that include a provision for secure wire entry under the rear of the desktop...

Quick Quote View Details

RDL - ACM Detector

Model: DCF-100MB MSRP: $521.60

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 XLR Out-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BN22C MSRP: $1076.31

Mount Type: Wall Mount
Application/Usage: Microphone

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 Out on Rear-Panel Terminal Block-White

Model: DD-BN2M MSRP: $992.02

The DD-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the ...DD-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN2M fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2M is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN2M. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN2M in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN2M is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN2M's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BN2MC MSRP: $1003.04

Mount Type: Wall Mount
Color Family: White
Product Color: White

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-1 XLR In and 1 Mini-jack In, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BN2MLC MSRP: $954.80

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-2 XLR In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-White

Model: DD-BN31 MSRP: $1108.57

The DD-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detacha...ble terminal block. Special software is not required to configure the DD-BN31. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input provides a switch to configure the input for stereo or summed mono. The Mini-jack output provides a switch to configure the output for stereo or left-channel mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN31 is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. The Mini-jack left and right inputs are each converted to a separate Dante network transmit channel. Each input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. The input is equipped with a selector to sum the left and right Mini-jack inputs. The summed signal feeds both Dante transmit channels. Two Dante audio channels are converted to unbalanced line level to feed the front-panel Mini-jack. Each channel provides -10 dBV unbalanced for a network digital audio level of -20 dBFS. The left and right Mini-jack channels are normally fed from Dante receive channels 3 and 4 (stereo). The Mini-jack output is equipped with a selector to feed both output channels from Dante receive channel 3 (mono). This selector may be set from the front of the unit when the cover plate is not installed. Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN31. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN31 in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN31 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN31's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Four Audio Inputs and Four Audio Outputs
One Mini-jack and Two XLR Front-Panel Inputs
One Mini-jack Front-Panel Output; Two Outputs on Rear-Panel Terminal Block

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-2 XLR In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BN31C MSRP: $1119.60

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-4 XLR In, 2 Out on Rear-Panel Terminal Block-White

Model: DD-BN40 MSRP: $1140.66

The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the D...D-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics. The four XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The outputs are connected through a detachable terminal block. The outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN40. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN40 in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN40 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN40's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Four Audio Inputs and Two Audio Outputs
Four XLR Front-Panel Inputs
Converts Four Standard XLR Mic or Line Audio Sources to Dante Network Channels

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-4 XLR In, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BN40C MSRP: $1151.69

Mount Type: Wall Mount
Color Family: White
Product Color: White

Quick Quote View Details

RDL - Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-BTN44C MSRP: $1265.07

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-Software Configurable-2 XLR In, 2 RCA In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-White

Model: DD-RN31 MSRP: $1117.56

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-Software Configurable-2 XLR In, 2 RCA In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST

Model: DD-RN31C MSRP: $1127.97

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-4 XLR In, 2 Out on Rear-Panel Terminal Block-White

Model: DD-RN40 MSRP: $1115.75

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-4 XLR In, 2 Out on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-RN40C MSRP: $1126.15

Application/Usage: Microphone

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-2 XLR In, 2 XLR Out, 2 In on Rear-Panel Terminal Block-White

Model: DD-RN42 MSRP: $1028.16

The DD-RN42 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, two balanced line inputs on a rear-panel detachable terminal block and two balanced line outputs on front-panel XLR... jacks. The module is configured and adjusted using RDL CONSOLE or other network control software. The DD-RN42 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-RN42 is PoE powered, and is available in multiple finishes with optional customized graphics. Mic/Line to network sectionThe two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are software-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. P48 phantom voltage may be software enabled when an input is set for mic level. Line to network sectionThe two rear-panel balanced or unbalanced inputs are each converted to a separate Dante network transmit channel. Control software sets the gain for an input level of either +4 dBu or -10 dBV. RDL Decora®-style jack plates matching the appearance of the DD-RN42 are optionally available for connection of various audio sources to the rear-panel inputs. An input plate may be located together with the DD-RN42 in a triple gang box or may be mounted remotely in a single box. Network to line sectionTwo Dante audio channels are converted to balanced line level feeding front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a software controlled attenuator adjustable in 1 dB steps to a maximum attenuation of 62 dB then OFF. The outputs are connected through a detachable terminal block. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-RN42 is a professional grade product with RDL mic preamplifiers for studio quality fidelity and low noise performance, coupled through XLR jacks housed in a steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-RN42's superior performance specifications make it ideally suited to installations requiring network control and exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Four Audio Inputs and Two Audio Outputs
Two Inputs and Outputs on XLR Jacks on Front Panels
Two Inputs on Rear Panel Detachable Terminal Block

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-2 XLR In, 2 XLR Out, 2 In on Rear-Panel Terminal Block-White -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DD-RN42C MSRP: $1038.56

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 XLR Out-Black

Model: DDB-BN22 MSRP: $1065.28

The DDB-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DDB-BN22. Each XLR input provide...s three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DDB-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDB-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DDB-BN22 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DDB-BN22's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on XLR Jacks on front panels
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 XLR Out-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDB-BN22C MSRP: $1076.31

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 Out on Rear-Panel Terminal Block-Black

Model: DDB-BN2M MSRP: $992.02

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 Out on Rear-Panel Terminal Block-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDB-BN2MC MSRP: $1003.04

Mount Type: Wall Mount
Application/Usage: Microphone

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-1 XLR In and 1 Mini-jack In, 2 Out on Rear-Panel Terminal Block-Black

Model: DDB-BN2ML MSRP: $943.77

The DDB-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special ...software is not required to configure the DDB-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input accepts mono or stereo unbalanced line-level sources that are summed to mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDB-BN2ML fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDB-BN2ML is PoE powered, and is available in multiple finishes with optional customized graphics. The XLR input is converted to feed one Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. The Mini-jack left and right inputs are summed to mono to feed one Dante network transmit channel. This input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DDB-BN2ML. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DDB-BN2ML in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DDB-BN2ML is a professional grade product with a discrete mic preamplifier for studio quality fidelity and low noise performance, coupled through a metal XLR jack housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DDB-BN2ML's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-1 XLR In and 1 Mini-jack In, 2 Out on Rear-Panel Terminal Block-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDB-BN2MLC MSRP: $954.80

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-2 XLR In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-Black

Model: DDB-BN31 MSRP: $1108.57

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-2 XLR In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDB-BN31C MSRP: $1119.60

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-4 XLR In, 2 Out on Rear-Panel Terminal Block-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDB-BN40C MSRP: $1151.69

Quick Quote View Details

RDL - Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDB-BTN44C MSRP: $1265.07

Mount Type: Wall Mount

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-Software Configurable-2 XLR In, 2 RCA In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-Black

Model: DDB-RN31 MSRP: $1117.56

The DDB-RN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input, left and right RCA jack inputs and one stereo Mini-jack line output on the front panels, plus two lin...e outputs on a rear-panel detachable terminal block. The module is configured and adjusted using RDL CONSOLE or other network control software. The DD-RN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-RN31 is PoE powered, and is available in multiple finishes with optional customized graphics.Mic/Line to network sectionThe two XLR inputs are each converted to a separate Dante network transmit channel. Gain settings are software-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. P48 phantom voltage may be software enabled when an input is set for mic level.Line to network sectionThe Mini-jack and RCA jack left and right inputs each provide a network digital audio level of -18 dBFS for an unbalanced -10 dBV input. The control software allows each of these inputs to feed either or both of two Dante channels. Multiple sources fed to a single Dante output are summed.Network to line sectionTwo Dante audio channels are converted to unbalanced line level to feed the front-panel Mini-jack. Each channel provides -10 dBV unbalanced for a network digital audio level of -18 dBFS.Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS.Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.The DDB-RN31 is a professional grade product with RDL mic preamplifiers for studio quality fidelity and low noise performance, coupled through XLR jacks housed in a steel chassis with dual powder-coated or stainless steel DecoraÃ‚® front plates.The DDB-RN31's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Four Audio Inputs and Four Audio Outputs
One Mini-Jack, Two RCA Jacks and Two XLR Front-Panel Inputs
One Mini-Jack Front-Panel Output; Two Balanced Outputs on Rear-Panel Terminal Block

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-Software Configurable-2 XLR In, 2 RCA In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-Black -Custom Labeled (See Part # ZCST

Model: DDB-RN31C MSRP: $1127.97

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-4 XLR In, 2 Out on Rear-Panel Terminal Block-Black

Model: DDB-RN40 MSRP: $1115.75

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-4 XLR In, 2 Out on Rear-Panel Terminal Block-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDB-RN40C MSRP: $1126.15

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-2 XLR In, 2 XLR Out, 2 In on Rear-Panel Terminal Block-Black -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDB-RN42C MSRP: $1038.56

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 XLR Out-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDS-BN22C MSRP: $1076.31

Mount Type: Wall Mount
Application/Usage: Microphone

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 Out on Rear-Panel Terminal Block-Stainless Steel

Model: DDS-BN2M MSRP: $992.02

The DDS-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the... DDS-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDS-BN2M fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDS-BN2M is PoE powered, and is available in multiple finishes with optional customized graphics.The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DDS-BN2M. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DDS-BN2M in a triple gang box or may be mounted remotely in a single box.Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.The DDS-BN2M is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates.The DDS-BN2M's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Product Features:

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-2 XLR In, 2 Out on Rear-Panel Terminal Block-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDS-BN2MC MSRP: $1003.04

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-1 XLR In and 1 Mini-jack In, 2 Out on Rear-Panel Terminal Block-Stainless Steel

Model: DDS-BN2ML MSRP: $943.77

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE-1 XLR In and 1 Mini-jack In, 2 Out on Rear-Panel Terminal Block-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDS-BN2MLC MSRP: $954.80

Mount Type: Wall Mount
Application/Usage: Microphone

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-2 XLR In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-Stainless Steel

Model: DDS-BN31 MSRP: $1108.57

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-2 XLR In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDS-BN31C MSRP: $1119.60

Mount Type: Wall Mount
Color Family: Gray
Product Color: Stainless Steel

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-4 XLR In, 2 Out on Rear-Panel Terminal Block-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDS-BN40C MSRP: $1151.69

Quick Quote View Details

RDL - Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDS-BTN44C MSRP: $1265.07

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-Software Configurable-2 XLR In, 2 RCA In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-Stainless Steel

Model: DDS-RN31 MSRP: $1117.56

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE-Software Configurable-2 XLR In, 2 RCA In, 1 Mini-jack In, 1 Mini-jack Out, 2 Out on Rear-Panel Terminal Block-Stainless Steel -Custom Labeled (See P

Model: DDS-RN31C MSRP: $1127.97

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-4 XLR In, 2 Out on Rear-Panel Terminal Block-Stainless Steel

Model: DDS-RN40 MSRP: $1115.75

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-4 XLR In, 2 Out on Rear-Panel Terminal Block-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDS-RN40C MSRP: $1126.15

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-2 XLR In, 2 XLR Out, 2 In on Rear-Panel Terminal Block-Stainless Steel

Model: DDS-RN42 MSRP: $1028.16

Quick Quote View Details

RDL - Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE-Software Configurable-2 XLR In, 2 XLR Out, 2 In on Rear-Panel Terminal Block-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DDS-RN42C MSRP: $1038.56

Quick Quote View Details

RDL - Decora-Style Active Loudspeaker-Gray-User Level Adjust

Model: DG-PSP1 MSRP: $338.11

Quick Quote View Details

RDL - Decora-Style Active Loudspeaker-Format-A-Gray-User Level Adjust

Model: DG-PSP1A MSRP: $338.11

APPLICATION: The D SERIES-PSP1A is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. It is a single-pair audio amplifier module compatible with RDL Format A twisted pair products. The -P...

Quick Quote View Details

RDL - Decora-Style Active Loudspeaker-Format-A-Gray-Installer Level Adjust

Model: DG-PSP1AF MSRP: $338.11

APPLICATION: The D SERIES-PSP1AF is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. It is a single-pair audio amplifier module compatible with RDL Format A twisted pair products. The -...

Quick Quote View Details

RDL - Decora-Style Active Loudspeaker-Gray-Installer Level Adjust

Model: DG-PSP1F MSRP: $338.11

APPLICATION: The D SERIES-PSP1F is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. The input accepts either a -10 dBV unbalanced or a +4 dBu balanced signal on the rear-panel detachabl...

Quick Quote View Details

RDL - 2 Watt Decora-Style 8 Ohm Loudspeaker-Gray

Model: DG-SP1A MSRP: $140.68

The D SERIES-SP1A is a compact 8 ohm loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. The driver is constructed of materials found in premium larger speakers. The unique steel enclosure provides full ba...

Quick Quote View Details

RDL - Detachable Mounting Kit

Model: DMK-5 MSRP: $9.49

The DMK5 includes a complete set of five detachable mounting tabs to mount RDL® modules.

Five Detachable Mounting Tabs
For Mounting RDL Modules to a Variety of Surfaces
High Strength Mounting for Fixed or Temporary Installations

Quick Quote View Details

RDL - DIN Rail-1 m

Model: DR35-1M MSRP: $12.51

Quick Quote View Details

RDL - Flat-Pak DIN Rail Adapter

Model: DRA-35F MSRP: $17.24

The DRA-35F is a DIN rail mounting bracket that provides positive mounting for any RDL FLAT-PAK™ module. DIN rail mounting is ideal in locations subject to vibration, in confined spaces or where traditional rack mounting is not desired. Th...

Quick Quote View Details

RDL - Power Supply DIN Rail Adapter

Model: DRA-35P MSRP: $16.96

Quick Quote View Details

RDL - Rack-Up DIN Rail Adapter

Model: DRA-35R MSRP: $28.21

The DRA-35R provides DIN rail mounting for any RDL RACK-UP® or MAX RACK-UP module, allowing full access to the front and rear panels of the mounted modules. The DRA-35R attaches to a 35 mm DIN Rail.

Device Supported: Radio
Height: 1.78"
Width: 5.94"

Quick Quote View Details

RDL - STICK-ON DIN Rail Adapter

Model: DRA-35S MSRP: $31.68

The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access to th...

Quick Quote View Details

RDL - STICK-ON DIN Rail Adapter

Model: DRA-35S6 MSRP: $53.68

Quick Quote View Details

RDL - TX Series DIN Rail Adapter

Model: DRA-35T MSRP: $15.56

The DRA-35T provides mounting for any RDL® TX or MAX TX module to a DIN rail. The unique design allows mounting TX modules in a rack, cabinet or anywhere else DIN rail mounting of TX modules is desired.

Device Supported: Modular Device
Compatibility: <b>Radio Design Labs Modules:</b><br><ul><li>TX</li><li>MAX TX</li></ul>

Quick Quote View Details

RDL - 1/4 in. Phone Jack on D Plate-Terminal block connections-Stainless Steel

Model: DS-1/4F MSRP: $25.30

Quick Quote View Details

RDL - 1/4 in. Phone Jack on D Plate-Terminal block connections-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-1/4FC MSRP: $37.44

Quick Quote View Details

RDL - Line Output Assembly-RCA jacks, Terminal block-Stainless

Model: DS-A2 MSRP: $110.10

Quick Quote View Details

RDL - Line Output Assembly-RCA jacks, Terminal block-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge) (See Part # ZCST-LBL for setup charge)

Model: DS-A2C MSRP: $122.24

Quick Quote View Details

RDL - Audio/Video Decora Jack Panel-Stainless-DB15, Phono, Mini

Model: DS-AVM4 MSRP: $78.81

Quick Quote View Details

RDL - Audio/Video Decora Jack Panel-Stainless-DB15, Phono, Mini -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-AVM4C MSRP: $90.95

Mount Type: Wall Mount
Number of RCA Ports: 2
Color Family: Dual Color

Quick Quote View Details

RDL - D Style Plate with No Jack Cut Out-Stainless Steel

Model: DS-BLANK MSRP: $21.59

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Customizable Front-Panel Text

Quick Quote View Details

RDL - D Style Plate with No Jack Cut Out-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-BLANKC MSRP: $33.72

Quick Quote View Details

RDL - BNC Jack on D Plate-Solder type-Stainless Steel

Model: DS-BNC MSRP: $30.78

Quick Quote View Details

RDL - Insulated Double BNC Jack on D Plate-Stainless Steel

Model: DS-BNC/D MSRP: $45.73

Number of Gangs: 1
Mount Type: Wall Mount
Color Family: Dual Color

Quick Quote View Details

RDL - Insulated Double BNC Jack on D Plate-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-BNC/DC MSRP: $57.87

Quick Quote View Details

RDL - BNC Jack on D Plate-Solder type-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-BNCC MSRP: $42.92

Quick Quote View Details

RDL - Wall-Mounted Bluetooth Audio Format-A Interface-Stainless Steel

Model: DS-BT1A MSRP: $515.81

The D SERIES-BT1A modules are Bluetooth audio receiving modules compatible with RDL® Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled device, the module receives stereo audio from the Bluetooth source. The ste...

Quick Quote View Details

RDL - Wall-Mounted Bluetooth Audio Format-A Interface-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-BT1AC MSRP: $526.65

Mount Type: Wall Mount
Color Family: Gray
Product Color: Stainless Steel

Quick Quote View Details

RDL - Consumer Input Jacks-Mono

Model: DS-CIJ3 MSRP: $141.41

The D/S-CIJ3 is the ideal choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line. The D/S-CIJ3 is a complete unbalanced line-level audio input module. Th...

Quick Quote View Details

RDL - Consumer Input Jacks-Mono -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-CIJ3C MSRP: $153.54

Quick Quote View Details

RDL - Consumer Input Jacks-Stereo

Model: DS-CIJ3D MSRP: $168.62

The D/S-CIJ3D is the ideal choice in installations requiring stereo unbalanced line level audio sources to feed stereo balanced (or unbalanced) audio lines. The D/S-CIJ3D is a complete unbalanced line-level audio input module. The front panel fe...

Quick Quote View Details

RDL - Consumer Input Jacks-Stereo -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-CIJ3DC MSRP: $180.87

Quick Quote View Details

RDL - Single plate for standard and specialty connectors-Stainless

Model: DS-D1 MSRP: $32.22

Product Color: Stainless Steel
Product Material: Steel
Height: 4.1"

Quick Quote View Details

RDL - Single plate for standard and specialty connectors-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-D1C MSRP: $44.36

Quick Quote View Details

Category

Price

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Products

Brands

Services

Resources

Education

Blog

Events

News

Sitemaps

Downloads

About Exertis Almo

eACCESS^™ Login