Radio Design Labs Products distributed by Exertis Almo

RDL - Passive Single-Pair Sender-Twisted Pair Format-A-Mini-Jack Input-Stainless

Model: DS-TPS7A MSRP: $142.66

The -TPS7A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products. The front panel features a single stereo mini-jack intended for stereo consumer line level audio sources. A studio-quality transformer prov...

Quick Quote View Details

RDL - Passive Single-Pair Sender-Twisted Pair Format-A-Mini-Jack Input-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPS7AC MSRP: $154.50

Quick Quote View Details

RDL - Format-A Multiple Location Audio Sender-Stainless Steel (Compatible with Guest Room Audio System) -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPS8AC MSRP: $273.18

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-Mini-Jack & Stereo RCA In-Stainless

Model: DS-TPSL1A MSRP: $301.04

The -TPSL1A modules are single pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The -TP...

Quick Quote View Details

RDL - Active Single-Pair Sender-Twisted Pair Format-A-Mini-Jack & Stereo RCA In-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPSL1AC MSRP: $313.18

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR Microphone & Stereo RCA In-Stainless

Model: DS-TPSL2A MSRP: $305.53

Quick Quote View Details

RDL - Active Two-Pair Sender-Twisted Pair Format-A-XLR Microphone & Stereo RCA In-Stainless -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPSL2AC MSRP: $317.67

Quick Quote View Details

RDL - Active Two-Pair Sender Dual Microphone Preamplifier-Format-A-Stainless

Model: DS-TPSM2A MSRP: $443.95

Quick Quote View Details

RDL - Active Two-Pair Sender Dual Microphone Preamplifier-Format-A-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-TPSM2AC MSRP: $456.06

Quick Quote View Details

RDL - XLR 3-pin Female & 3-pin Male on D Plate-Terminal block connections-Stainless Steel

Model: DS-XLR2 MSRP: $39.91

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Female & 3-pin Male on D Plate-Terminal block connections-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-XLR2C MSRP: $52.06

Quick Quote View Details

RDL - Dual XLR 3-pin Female Jacks on D Plate-Terminal block connections-Stainless Steel

Model: DS-XLR2F MSRP: $39.98

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - Dual XLR 3-pin Female Jacks on D Plate-Terminal block connections-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-XLR2FC MSRP: $52.13

Quick Quote View Details

RDL - Dual XLR 3-pin Male Jacks on D Plate-Terminal block connections-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-XLR2MC MSRP: $50.08

Quick Quote View Details

RDL - XLR 3-pin Female Jack on D Plate-Terminal block connections-Stainless Steel

Model: DS-XLR3F MSRP: $34.44

All-Steel Construction
Compatible with Decora®-Style Mounting Accessories
Rear Panel Connections on Terminal Block

Quick Quote View Details

RDL - XLR 3-pin Female Jack on D Plate-Terminal block connections-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-XLR3FC MSRP: $46.58

Quick Quote View Details

RDL - XLR 3-pin Male Jack on D Plate-Terminal block connections-Stainless Steel

Model: DS-XLR3M MSRP: $34.44

Quick Quote View Details

RDL - XLR 3-pin Male Jack on D Plate-Terminal block connections-Stainless Steel -Custom Labeled (See Part # ZCST-LBL for setup charge)

Model: DS-XLR3MC MSRP: $46.58

Color Family: Gray
Product Color: Stainless Steel

Quick Quote View Details

RDL - STICK-ON Series Detachable Terminal Block

Model: DTB MSRP: $11.29

Quick Quote View Details

RDL - AC Extension Cord (6 pack)-North American-6 in.

Model: EC-6 MSRP: $46.83

Kit of 6 cords, Length = 6 in. 15.25 cm (North America, UL/CSA)

Quick Quote View Details

RDL - Stereo Audio Distribution Amplifier-1X4

Model: EZ-ADA4 MSRP: $258.60

The EZ-ADA4 is a stereo audio distribution amplifier with gain adjustment and audio level metering. The input is connected through RCA jacks or a MINI jack. A front-panel knob adjusts for high or low input levels using the left and right channel...

Quick Quote View Details

RDL - Stereo Audio Distribution Amplifier-1X4

Model: EZ-ADA4X MSRP: $257.34

Quick Quote View Details

RDL - Audio Format Converter-Stereo Balanced Unbalanced

Model: EZ-AFC2 MSRP: $367.45

The EZ-AFC2 is a stereo bi-directional audio format converter with level controls. Conversion is provided between balanced rear-panel XLR jacks and unbalanced front-panel RCA jacks. LED VU metering is provided for all audio channels facilitating...

Quick Quote View Details

RDL - Audio Format Converter-Stereo Balanced Unbalanced

Model: EZ-AFC2X MSRP: $367.45

Quick Quote View Details

RDL - Composite Video and Stereo Audio Input Switcher-4X1

Model: EZ-AVX4 MSRP: $362.44

Quick Quote View Details

RDL - Component Chassis for 6 Increments of 1/6 Rack Width

Model: EZ-CC6 MSRP: $152.30

Quick Quote View Details

RDL - Desktop Chassis for 1/6 Rack Width EZ Products

Model: EZ-DC1 MSRP: $76.78

Mounts 1/6 Width EZ Product to Desktop
Installs Quickly With Two Screws
Covers Cable Port in Desktop

Quick Quote View Details

RDL - Desktop Chassis for 1/3 Rack Width EZ Products

Model: EZ-DC2 MSRP: $83.77

Mounts 1/3 Width EZ Product to Desktop
Installs Quickly With Two Screws
Covers Cable Port in Desktop

Quick Quote View Details

RDL - Filler Panel-1/6 Rack Width for EZ-RA6 or EZ-CC6

Model: EZ-FP1 MSRP: $15.50

Width: 2.8"
Compatibility: <b>RDL Chassis:</b><br><ul><li>EZ-RA6</li><li>EZ-CC6</li></ul>

Quick Quote View Details

RDL - Stereo Headphone Distribution Amp-1X4 Front-Panel Outputs

Model: EZ-HDA4A MSRP: $286.58

The EZ-HDA4A contains four stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on front-panel MINI jacks. One stereo input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a 1...

Quick Quote View Details

RDL - Stereo Headphone Distribution Amp-1X4 Front-Panel Outputs

Model: EZ-HDA4AX MSRP: $286.58

Quick Quote View Details

RDL - Stereo Headphone Distribution Amp-1X4 Rear-Panel Outputs

Model: EZ-HDA4B MSRP: $286.58

The EZ-HDA4B contains four stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on rear-panel MINI jacks. One stereo input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a 1/...

Quick Quote View Details

RDL - Stereo Headphone Distribution Amp-1X4 Rear-Panel Outputs

Model: EZ-HDA4BX MSRP: $286.58

Quick Quote View Details

RDL - Stereo Headphone Distribution Amp-1X6 Rear-Panel Outputs

Model: EZ-HDA6 MSRP: $336.31

The EZ-HDA6 contains six stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on rear-panel 1/4" jacks. One input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a dual 1/4" j...

Quick Quote View Details

RDL - Stereo Headphone Distribution Amp-1X6 Rear-Panel Outputs

Model: EZ-HDA6X MSRP: $336.31

Quick Quote View Details

RDL - Stereo Audio "HUM KILLER"

Model: EZ-HK1 MSRP: $162.29

The EZ-HK1 is a superior-quality stereo audio transformer isolation module for use with unbalanced, high impedance audio inputs. Input and output connections are provided on gold-plated RCA jacks. The shield connection of each INPUT jack is elec...

Quick Quote View Details

RDL - Composite Video "HUM KILLER"

Model: EZ-HK2 MSRP: $175.09

Quick Quote View Details

RDL - Stereo Audio/Composite Video "HUM KILLER"

Model: EZ-HK3 MSRP: $184.93

Quick Quote View Details

RDL - Stereo Audio Input Switcher with Headphone Amp-4X1

Model: EZ-HSX4 MSRP: $312.83

The EZ-HSX4 is a stereo audio source selector with an output volume control. Line-level and headphone outputs are provided. This unit is ideal as a four input headphone amplifier and as a source selector feeding an associated audio amplifier. Th...

Quick Quote View Details

RDL - Stereo Audio Input Switcher with Headphone Amp-4X1

Model: EZ-HSX4X MSRP: $312.83

Quick Quote View Details

RDL - Microphone Compressor

Model: EZ-MCP1 MSRP: $300.18

The EZ-MCP1 is an in-line microphone compressor that produces consistent audio levels despite wide variations (up to 30 dB) from the microphone. It is installed between a dynamic or condenser microphone and a mic-level mixer or amplifier input. ...

Quick Quote View Details

RDL - Microphone Compressor

Model: EZ-MCP1X MSRP: $300.18

Country of Origin: United States

Quick Quote View Details

RDL - Microphone Preamplifier-Stereo Output with Compressors

Model: EZ-MPA1 MSRP: $279.69

The EZ-MPA1 is a microphone preamplifier with front-panel volume control and audio level metering. A front-panel switch engages an audio compressor to control overloads and clipping during high level audio bursts or peaks from the microphone. Dy...

Quick Quote View Details

RDL - Microphone Preamplifier-Stereo Output with Compressors

Model: EZ-MPA1X MSRP: $279.69

Quick Quote View Details

RDL - Dual Microphone Preamplifier-Stereo Output with Compressors

Model: EZ-MPA2 MSRP: $347.46

The EZ-MPA2 is a stereo microphone preamplifier with front-panel volume controls and audio level metering. A front-panel switch engages audio compressors to control overloads and clipping during high level audio bursts or peaks from the micropho...

Quick Quote View Details

RDL - Dual Microphone Preamplifier-Stereo Output with Compressors

Model: EZ-MPA2X MSRP: $347.46

Quick Quote View Details

RDL - Stereo Line-Level Audio Mixer-4X1

Model: EZ-MX4L MSRP: $297.89

The EZ-MX4L is a stereo audio mixer with four line inputs. All line inputs connect through RCA jacks; one also includes a MINI-jack input. Left and right channel LED VU metering facilitates easy level adjustment. The line output is available on ...

Quick Quote View Details

RDL - Stereo Line-Level Audio Mixer-4X1

Model: EZ-MX4LX MSRP: $296.44

Quick Quote View Details

RDL - Mic and Stereo Line Audio Mixer-4X1

Model: EZ-MX4ML MSRP: $316.02

The EZ-MX4ML is a stereo audio mixer with two mic and two line inputs. Microphones connect through balanced XLR jacks that provide phantom voltage. Both line inputs connect through RCA jacks; one also includes a MINI-jack input. Left and right c...

Quick Quote View Details

RDL - Mic and Stereo Line Audio Mixer-4X1

Model: EZ-MX4MLX MSRP: $314.48

Quick Quote View Details

RDL - 20 Watt Stereo Audio Mixer Amplifier with EQ

Model: EZ-MXA20X MSRP: $394.33

Quick Quote View Details

RDL - 20 Watt Stereo Audio Power Amplifier

Model: EZ-PA20 MSRP: $248.91

Audio Channels: 2
RMS Output Power: 20 W

Quick Quote View Details

RDL - 20 Watt Stereo Audio Power Amplifier

Model: EZ-PA20X MSRP: $247.70

Quick Quote View Details

RDL - 24 Vdc Power Distributor-1x3

Model: EZ-PD3 MSRP: $180.87

Quick Quote View Details

RDL - Stereo Phono Preamplifier

Model: EZ-PH1 MSRP: $191.48

The EZ-PH1 is a stereo phono preamplifier with front-panel volume trimmers and audio level metering. Stereo RCA jacks and a grounding screw are provided on the rear panel for connecting a turntable tone arm. The input is preamplified with RIAA e...

Quick Quote View Details

RDL - Stereo Phono Preamplifier

Model: EZ-PH1X MSRP: $191.48

Quick Quote View Details

RDL - Rack Adapter for 6 Increments of 1/6 Rack Width

Model: EZ-RA6 MSRP: $86.50

Mounts All EZ A/V ProductsMounts EZ Storage DrawersBase Plate Slides Out for Easy Product MountingOccupies One RU in Standard 19" Rack

Device Supported: A/V Equipment
Height: 1.75"
Width: 19"

Quick Quote View Details

RDL - Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6

Model: EZ-SD1 MSRP: $50.54

Use In Place of Filler Panel(s)
Holds Adapters and Cables
Mount in EZ-CC6 or EZ-RA6

Quick Quote View Details

RDL - Storage Drawer-1/3 Rack Width for EZ-RA6 or EZ-CC6

Model: EZ-SD2 MSRP: $52.72

Form Factor: Rack-mountable
Height: 1.5"
Width: 5.7"

Quick Quote View Details

RDL - Surface Mount Bezel for 1/6 Rack Width EZ Products

Model: EZ-SMB1 MSRP: $44.01

Height: 2.7"
Width: 4.1"
Compatibility: RDL EZ Series 1/6 Width Racks

Quick Quote View Details

RDL - Surface Mount Bezel for 1/3 Rack Width EZ Products

Model: EZ-SMB2 MSRP: $47.30

Height: 2.7"
Width: 7"
Compatibility: RDL's 1/3 Rack Width EZ Series of A/V Components

Quick Quote View Details

RDL - Stereo Audio Input Switcher-4X1

Model: EZ-SX4 MSRP: $289.86

The EZ-SX4 is a stereo audio source selector with an output volume control that adjusts the line-level output. This unit is ideal as a four input source selector feeding an associated audio amplifier. The user can conveniently select an audio so...

Quick Quote View Details

RDL - Stereo Audio Input Switcher-4X1

Model: EZ-SX4X MSRP: $289.86

Quick Quote View Details

RDL - Under Counter Bracket Pair for all EZ Product Widths

Model: EZ-UCB2 MSRP: $31.00

Brackets Snap on EZ Case for Easy AlignmentEZ Product Secures Quickly Using Two ScrewsBrackets Fasten to Underside of Counter or Shelf

Quick Quote View Details

RDL - Video Distribution Amplifier-1X2 BNC NTSC/PAL

Model: EZ-VDA2B MSRP: $181.24

The EZ-VDA2B is a composite video distribution amplifier with two outputs. The input and outputs are all 75 Ω on BNC connectors. If the outputs are connected to long coaxial cables (typically 100 to 1000 feet) the front-panel gain and equa...

Quick Quote View Details

RDL - Video Distribution Amplifier-1X3 BNC NTSC/PAL

Model: EZ-VDA3B MSRP: $254.70

The EZ-VDA3B is a composite video distribution amplifier with three outputs. The input and outputs are all 75 Ω on BNC connectors. If the outputs are connected to long coaxial cables (typically 100 to 1000 feet) the front-panel gain and eq...

Quick Quote View Details

RDL - Video Distribution Amplifier-1X3 BNC NTSC/PAL

Model: EZ-VDA3BX MSRP: $254.70

Quick Quote View Details

RDL - Automatic Level Control-Mono-Terminals

Model: FP-ALC1 MSRP: $424.12

Quick Quote View Details

RDL - Automatic Level Control-Stereo-Phono Jacks

Model: FP-ALC2 MSRP: $472.03

Quick Quote View Details

RDL - Stereo Audio/Video Distributor-1x4-Phono Jacks

Model: FP-AVDA4 MSRP: $504.94

Quick Quote View Details

RDL - Balanced to Unbalanced Converter-2 channel

Model: FP-BUC2 MSRP: $334.80

Quick Quote View Details

RDL - Locking Cable Tie Bracket for FP-RRA and FP-RRAH

Model: FP-CT1 MSRP: $13.12

Quick Quote View Details

RDL - 12 Vdc to 24 Vdc Converter

Model: FP-DCC1 MSRP: $391.52

Quick Quote View Details

RDL - Digital Audio Format Converter (24/192)

Model: FP-DFC2 MSRP: $875.19

Quick Quote View Details

RDL - 10.4" Rack Mount for FLAT-PAK Series Products

Model: FP-HRA MSRP: $104.65

The FP-HRA rack mounts FLAT-PAK modules. This adapter fits 10.4" racks.

Fits 10.4" Racks
Mounts One or More FLAT-PAK™ Modules
Exclusive Track System Provides Flexible Module Placement

Quick Quote View Details

RDL - Dual Mic Phantom Adapter 12, 24, 48 V-XLR

Model: FP-MPA2 MSRP: $414.34

Product Material: Metal
Height: 1.4"
Width: 3.3"

Quick Quote View Details

RDL - Message Repeater

Model: FP-MR2 MSRP: $554.71

Quick Quote View Details

RDL - Remote Controlled Line-Level Mixer

Model: FP-MX3R MSRP: $625.54

The FP-MX3R is the ideal choice where a user-accessible mixer must control the volume of multiple sources. The mixer accepts balanced or unbalanced audio sources through a detachable terminal block. FP-MX3R outputs are provided in balanced and u...nbalanced formats. Two unbalanced outputs are available to feed the mono mixer output to a stereo amplifier input. Remote control of the mixer allows audio signals to be kept at a single equipment location. Audio is mixed by VCA circuits that are adjusted by control signals from the remote control. Each input is equipped with an INPUT GAIN trimmer to set the proper operating level for each source. A standard RDL dual-LED VU meter provides visual indication of the output level from the mixer. Each input is normally adjusted to produce +4 dBu on the VU meter when the corresponding remote control channel is adjusted to maximum. This assures ample headroom at all normal operating levels. The mixer output is mono. The output is available on a single balanced detachable terminal block or on two unbalanced RCA jacks intended to connect directly to the stereo input of a power amplifier. The AUDIO LED illuminates whenever audio is present at the output of the mixer, defined as greater than 35 dB below +4 dBu. This threshold triggers the AUDIO DETECT OUTPUTS. Two open collectors are provided on a detachable terminal block. One of these terminals switches low when audio is present, and may be used to switch amplifiers or other system components on. The other terminal is pulled low when audio is not present. It is intended for muting the digital carrier of power amplifiers equipped for remote muting. Either of these terminals may be used to trigger a variety of other RDL modules or OEM equipment. The use of these terminals to shut down unused equipment can produce effective system energy and cost savings. These control terminals normally remain triggered for 10 minutes after audio is absent. The delay can be increased to 20 minutes using a ground jumper on the terminal block. The mixer levels are set by RDL remote controls that connect directly to the FP-MX3R through an RJ45 jack using standard twisted pair cable. The control ports on the mixer and remote controls are color-coded light blue to distinguish them from other twisted pair jacks. The mixer provides power to the remote control. Either a two or three channel remote control may be used. If remote mixing of only two channels is needed, a two channel remote may be used. INPUT 3 becomes the input channel that is not remotely controlled. This input may be left active at a level set on the corresponding INPUT GAIN control, typically for a paging or music source, or may be disabled by a switch set during installation. If the cable connected to the remote control becomes disconnected, the mixer output mutes.

Product Features:

3-Channel Remote-Controlled Audio Mixer
VCA Level Control for Each Input
Balanced or Unbalanced Inputs

Quick Quote View Details

RDL - 4 Mic or Line Input Mixer-Mic and Line Out

Model: FP-MX4 MSRP: $666.40

The FP-MX4 is a single-channel audio mixing module featuring four identical inputs. Each input accepts either a mic or line level source. The output section provides four mixing potentiometers corresponding to the four inputs. The output section...

Quick Quote View Details

RDL - Network to Mic/Line Interface-Dante Input-2 Balanced Mic/Line Outputs

Model: FP-NML2 MSRP: $735.22

APPLICATION: The FP-NML2 is a high quality converter that provides professional line-level outputs from two Dante network audio channels. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional o...

Quick Quote View Details

RDL - Network to Mic/Line Interface-Dante Input-2 Balanced Mic/Line Outputs-with PoE

Model: FP-NML2P MSRP: $830.04

The FP-NML2 modules are Dante audio network interface products compatible with mic-level or line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards i...n commercial/industrial installations. APPLICATION: The FP-NML2 is a high quality converter that provides professional line-level outputs from two Dante network audio channels. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. Each output is equipped with a recessed mic/line switch that provides 50 dB of attenuation to feed the microphone input of a mixer-amplifier or other equipment with mic inputs. The FP-NML2 is powered from an external 24 Vdc power supply, available separately. The FP-NML2P is equipped to operate from a PoE enabled network switch. The FP-NML2P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. The FP-NML2 includes a dc output jack and extension cable that allows it to be operated from a common power supply with RDL FLAT-PAK amplifiers. One audio output connects to the FLAT-PAK amplifier input, and the second output may be connected to an additional amplifier. The FP-NML2's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. The FP-NML2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.

Product Features:

Adapts Standard Audio Amplifiers to a Dante Network
Converts Two Dante Network Audio Signals to Professional Line Level
Each Output is Switch-Selectable for Mic or Line Level

Quick Quote View Details

RDL - Network to Mic/Line Interface with VCA-Dante Input-2 Balanced Mic/Line Outputs

Model: FP-NML2V MSRP: $860.62

Quick Quote View Details

RDL - Network to Mic/Line Interface with VCA-Dante Input-2 Balanced Mic/Line Outputs-with PoE

Model: FP-NML2VP MSRP: $955.44

Quick Quote View Details

RDL - 18 W Audio Power Amplifier with Power Supply

Model: FP-PA18 MSRP: $358.74

Quick Quote View Details

RDL - 18 W High Ambient Temperature Audio Power Amplifier with Power Supply

Model: FP-PA18H MSRP: $343.24

The FP-PA18H is a high efficiency 18 W power amplifier with a line input, 8 ohm output and audio compressor capable of operation in a high ambient temperature environment. The thermal characteristics of the module case and construction throughou...t using high temperature components permit operation over a range of 0 to 70 degrees C. The FP-PA18H is ideally suited to outdoor applications, signage and other installations where ambient temperatures may become elevated due to limited convection.(Note: The power supply must be mounted in a location with a maximum ambient temperature of 40 degrees C. The FP-PA18H module is available separately for installation with a high temperature power supply or in systems with distributed 24 Vdc power. Contact RDL technical support for more details.)The FP-PA18H features a balanced line level input that may be connected unbalanced. A gain control located next to the terminal block is designed to be adjusted manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. The output drives one 8 ohm speaker or multiple speakers connected to present an 8 ohm load to the amplifier.The FP-PA18H includes an analog compressor/limiter for fidelity audibly superior to conventional class D amplifiers with digital limiting. The input GAIN setting determines whether the limiter alone is used for clipping suppression, or if the full compressor/limiter will be used to substantially increase the average output power beyond that of a standard 18 W amplifier. A red COMPRESSION LED flashes when the limiter is preventing output clipping. Normal audio level signals remain unaffected by the compressor thereby preserving audio dynamics. If the input level is increased so that the compressor is active, the LED remains dimly lit between peak flashes. The audio is compressed according to three dynamic time constants providing aural transparency while maintaining clean, unclipped amplified audio for input overloads of up to 20 dB. The FP-PA18H, with compression, is capable of producing average audio output levels and clarity normally expected from amplifiers with a much higher output power rating.The output stage includes an audio detector that illuminates the green OUTPUT ACTIVE LED and provides an active open collector output when the output stage is active and amplified audio is present at the module output. This output is useful to control other equipment or to verify amplifier operation using high or low frequency low level test tones. The detector triggers with only 30 mW of output power at 20 Hz or 5 mW of output power at 20 kHz.A blue POWER LED illuminates when the FP-PA18H is powered from its external 24 Vdc power supply. The module is equipped with both thermal and output short circuit protection. The high efficiency Class D output stage produces minimal heat for all levels of expected voice or music modulation.Wherever an ultra compact, high quality, high efficiency audio power amplifier is needed to provide reliability and unsurpassed versatility, the FP-PA18H is the ideal choice. Use the FP-PA18H individually, or combine it with other RDL products as part of a complete audio/video system.

Product Features:

18 Watts RMS into 8 Ω
Operation in Elevated Ambient Temperatures to 70°C
Input / Output Detachable Terminal Block Connections

Quick Quote View Details

RDL - 18 W High Ambient Temperature Audio Power Amplifier with Power Supply-Export Model-Excludes Power Cord

Model: FP-PA18HX MSRP: $343.24

Quick Quote View Details

RDL - 18 W Audio Power Amplifier with Power Supply-Export Model-Excludes Power Cord

Model: FP-PA18X MSRP: $358.74

Quick Quote View Details

RDL - Power Amplifier-20 W 8 Ohm

Model: FP-PA20 MSRP: $277.59

The FP-PA20 features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels a...

Quick Quote View Details

RDL - Power Amplifier-20 W 70 & 100 V Outputs

Model: FP-PA20A MSRP: $283.86

The FP-PA20A features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels ...

Quick Quote View Details

RDL - Power Amplifier-20 W 25 V Outputs

Model: FP-PA20B MSRP: $273.68

Quick Quote View Details

RDL - Audio Amplifier 35 W, 25 V / 70 V / 100 V with Power Supply

Model: FP-PA35A MSRP: $413.06

The FP-PA35A is the ideal choice in many applications where multiple 25 V, 70 V or 100 V speakers in a zone need to be powered from a single audio power amplifier. The FP-PA35A features a balanced line level input that may be connected unbalance...d. A front panel gain control is designed to be adjusted manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. Multiple distributed sound system speakers connect to the corresponding 25 V, 70 V or 100 V amplified output. The FP-PA35A includes an analog compressor/limiter for audio fidelity audibly superior to conventional class D amplifiers with digital limiting. The input GAIN setting determines whether the limiter alone is used for clipping suppression, or if the full compressor/limiter will be used to substantially increase the average output power beyond that of a standard 35 W amplifier. A red COMPRESSION LED flashes when the limiter is preventing output clipping. Normal audio level signals remain unaffected by the compressor thereby preserving audio dynamics. If the input level is increased so that the compressor is active, the LED remains dimly lit between peak flashes. The audio is compressed according to three dynamic time constants providing aural transparency while maintaining clean, unclipped amplified audio for input overloads of up to 20 dB. The FP-PA35A, with compression, is capable of producing average audio output levels and clarity normally expected from amplifiers with a much higher output power rating. The FP-PA35A circuits are all designed for low power consumption. In the absence of an audio input, a digital timer is enabled to switch the class D output stage off. When this sleep mode is active, the amplifier module and its included RDL power supply consume less than 1 W of mains power. A front-panel control sets the sleep mode delay timer to 5, 15 or 25 minutes. The control also permits the installer to bypass the sleep mode to conform to system specifications that require the amplifier to be active at all times. Upon detection of an input signal, the amplifier is nearly inaudibly and instantly restored to full operation within 150 milliseconds. A blue POWER LED illuminates when the FP-PA35A is powered from its external 24 Vdc power supply. The power LED is dimly illuminated when the sleep mode disables the amplifier and glows brightly when the amplifier operation is fully enabled. The module is equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stage produces minimal heat for all levels of expected voice or music modulation. Continuous full-power operation with audio tones will not damage the amplifier, but is not recommended.

Product Features:

35 Watts RMS Constant Voltage Amplifier
25 V, 70 V or 100 V Output
Plenum Rated per UL 2043 Standard

Quick Quote View Details

RDL - 3 Band Parametric Equalizer-Terminals/Phono Jacks

Model: FP-PEQ3 MSRP: $516.69

Quick Quote View Details

RDL - Power Supply Mounting Bracket

Model: FP-PSB1A MSRP: $65.84

The FP-PSB1A mounts one desktop style power supply and it includes a provision to mount other modules. Any RDL FP-PA20 type audio power amplifier can mount directly to the FP-PSB1A. RDL offers mounting brackets for mounting other RDL modules in ...

Quick Quote View Details

RDL - Rack Adapter FLAT-PAK Series-19 in. Fixed

Model: FP-RRA MSRP: $110.72

FLAT-PAK modules slide into FP-RRA mounting track 2 RU.Modules lock into position with optional FP-CT1.

Device Supported: Modular Device
Height: 3.47"
Width: 19"

Quick Quote View Details

RDL - Rack Adapter FLAT-PAK Series-19 in. Hinged

Model: FP-RRAH MSRP: $140.68

FP-RRAH hinged panel provides easy module access

Device Supported: Modular Device
Height: 3.47"
Width: 19"

Quick Quote View Details

RDL - Rear rack rail mounting kit for any FLAT-PAK module

Model: FP-RRB1 MSRP: $22.34

The FP-RRB1 mounting kit contains two brackets to attach a FLAT-PAK module to a rear rack rail or to any flat surface.

Application/Usage: Module
Application/Usage: Rack
Application/Usage: Chassis

Quick Quote View Details

RDL - SPDIF Repeater / Amplifier

Model: FP-SPR1 MSRP: $282.46

Quick Quote View Details

RDL - Power Inserter-Twisted Pair-four sets of outputs-signal loop-through

Model: FP-TP4PW MSRP: $327.37

Quick Quote View Details

RDL - Format-A Two-Pair Audio Sender (Compatible with Guest Room Audio System)

Model: FP-TPS4A MSRP: $268.54

Quick Quote View Details

RDL - Format-A Audio Sender/Receiver (Compatible with Guest Room Audio System)

Model: FP-TPSR4A MSRP: $364.42

Quick Quote View Details

Category

Price

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Product Features:

Sitemaps

Downloads